Title: Measurements in Chemistry
1Chapter 2
- Measurements in Chemistry
2Questions to be Answered
- What does a measurement involve?
- How do you make measurements properly?
- How do we convert between measurements of one
unit to measurements of a new unit?
3Physical Quantities
- Physical quantities measured physical
properties - Number
- Unit
4Proper Measurements
- Number
- Reflect the certainty to which the measurement
was made - Unit
- Represent the type of measurement made
- Mass
- Volume
- Length
5Measurement and Significant Figures
- Number
- Certain digits - all digits that can be stated as
fact - Read from smallest digit
- One Uncertain digit the first digit that is
estimated - No additional digits should be recorded
- Ruler practice
- Uncertainty always exist in the last digit of a
number - Balance example
6Measurement and Significant Figures
- The total number of digits used to express such a
measurement is the number of significant figures.
7Measurement and Significant Figures
Instrument used directly impacts the certainty of
the measurement and hence the of significant
figures that can be reported.
8Scientific Notation
- Scientific notation - convenient way to write a
very small or a very large number. - All digits listed in the number portion are
significant - Rules for conversion
- Move decimal so that it follows first non-zero
digit - Write all sig figs in number followed by (x 10)
- Raise the ten to the appropriate power
- Decimal moved left () the number of places moved
- Decimal moved right (-) the number of places moved
9Physical Quantities
10Physical Quantities
11Measuring Mass
- Mass is a measure of the amount of matter in an
object. Mass does not depend on location. - Weight is a measure of the gravitational force
acting on an object. Weight depends on location. - Chemist measure grams or milligrams
12Measuring Length and Volume
- Length has the SI unit of meter (m)
- Volume length x width x height
- Units m3
- Chemist tend to use milliliters (mL) or Liters (L)
13Measurement and Significant Figures
- When reading a measured value
- All nonzero digits are significant.
- Zeros
- RULE 1. Zeros in the middle of a number are they
are always significant. - RULE 2. Zeros at the beginning of a number are
not significant - RULE 3. Zeros at the end of a number and after
the decimal point are significant. - RULE 4. Zeros at the end of a number and before
an implied decimal point may or may not be
significant. We cannot tell whether they are part
of the measurement or whether they act only to
locate the unwritten but implied decimal point. - If a decimal point is shown the zeros are
significant
14Problem
- Which measurement is expressed to 4 significant
figures? - A.  0.00423 kg
- B.  24.049 cm
- C.  1300 K
- D.  82,306 m
- E.  62.40 g
15Performing Problems with Measurements
- Why are significant figures important?
- How do we convert from one unit to another?
16Rounding Off Numbers
- Often when doing arithmetic on a calculator, the
answer is displayed with several digits. - Example - 13.6 / 28
- How many do you keep?
17Rounding Off Numbers
- RULE 1. Multiplication or Division
- the answer cannot have more significant figures
than the original number with the fewest.
18Rounding Off Numbers
- RULE 2. Addition or Subtraction
- the answer cannot have more digits after the
decimal point than the original number with the
fewest.
19Rounding Off Numbers
- Once you decide how many digits to retain, the
rules for rounding off numbers are
straightforward - If the first number dropped is
- 4 or less let it rest
- 5 or more let it score
20Problem
- The appropriate number of significant figures in
the result of 15.234 - 15.208 is - A.  1
- B.  2
- C.  3
- D.  4
- E.  5
21Problem
- Select the answer that expresses the result of
this calculation with the correct number of
significant figures.   - A.  13.3568
- B.  13.357
- C.  13.36
- D.  13.4
- E.  13
22Problem
- The result of (3.8621 1.5630) - 5.98 is
properly written as - A.  0.06
- B.  0.056
- C.  0.0565
- D.  0.05646
- E.  0.056462
23Converting a Quantity from One Unit to Another
(Starting quantity) x (Conversion factor)
Equivalent quantity
24Converting a Quantity from One Unit to Another
- What is a conversion unit
- Ratios, fractions, or two measured quantities
that are equivalent - Equal 1
- The important item in these numbers are
- UNITS
25Example
- How many kilometers is 26.22 miles?
- STEP 1 Identify the information given.
- STEP 2 Identify the information needed to
answer. - STEP 3 Find the relationship(s) between the
known information and unknown answer, and plan a
series of steps, including conversion factors,
for getting from one to the other. - STEP 4 Solve the problem.
- BALLPARK CHECK Make a rough estimate to be sure
the value and the units of your calculated answer
are reasonable. -
26Problem
- The distance between carbon atoms in ethylene is
134 picometers. Which of the following expresses
that distance in meters? - A.  1.34 10-13 m
- B.  1.34 10-12 m
- C.  1.34 10-10 m
- D.  1.34 10-7 m
- E.  1.34 10-6 m
27Problem
- A dose of medication was prescribed to be 35
microliters. Which of the following expresses
that volume in centiliters? - A.  3.5 105 cL
- B.  3.5 104 cL
- C.  3.5 cL
- D.  3.5 10-4 cL
- E.  3.5 10-3 cL
28Problem
- The average distance between the Earth and the
Moon is 240,000 miles. Express this distance in
kilometers. - A.  6.1 105 km
- B.  5.3 105 km
- C.  3.9 l05 km
- D.  1.5 105 km
- E.  9.4 104 km
29Problem
- The speed needed to escape the pull of Earth's
gravity is 11.3 km/s. What is this speed in
mi/h? - A.  65,500 mi/h
- B.  25,300 mi/h
- C.  18,200 mi/h
- D.  1,090 mi/h
- E.  5.02 10-3 mi/h
30Measuring Temperature
- 3 scales
- Fahrenheit
- Celsius
- Kelvin
31Measuring Temperatures
- Converting Between Temperature Scales
- oF (1.8 x oC) 32
- K oC 273.15
32Problem
- Isopropyl alcohol, commonly known as rubbing
alcohol, boils at 82.4C. What is the boiling
point in kelvins? - A.  387.6 K
- B.  355.6 K
- C.  323.6 K
- D.  190.8 K
- E.  -190.8 K
33Problem
- Acetic acid boils at 244.2F. What is its boiling
point in degrees Celsius? - A.  382.0C
- B.  167.7C
- C.  153.4C
- D.  117.9C
- E.  103.7C
34Units of Energy and Heat
- Energy The capacity to do work or supply heat.
- SI units - Joule (J)
- calorie is another unit often used to measure
energy. - One calorie (cal) - the amount of heat necessary
to raise the temperature of 1 g of water by 1C. - Calorie food calorie
- Energy equivalencies
- 4.184 J 1 cal
- 1000 cal 1 Cal
- 4.184 kJ 1 Cal
35Units of Energy and Heat
- A Snickers candy bar contains 280 Calories, of
which the fat content accounts for 120 Calories.
What is the energy of the fat content, in kJ? - A.  5.0 10-1 kJ
- B.  29 kJ
- C.  5.0 102 kJ
- D.  1.2 103 kJ
- E.  5.0 105 kJ
36Problem
- Natural gas, or methane, is an important fuel.
Combustion of one mole of methane releases 802.3
kilojoules of energy. How much energy does that
represent in kilocalories? - A.  1.918 10-1 kcal
- B.  1.918 102 kcal
- C.  3.360 103 kcal
- D.  1.918 105 kcal
- E.  3.360 106 kcal
37Units of Heat and Energy
- Not all substances are created equal.
- One calorie raises the temperature of 1 g of
water by 1C but raises the temperature of 1 g of
iron by 10C. - The amount of heat needed to raise the
temperature of 1 g of a substance by 1C is
called the specific heat of the substance (c). - Specific heat is measured in units of cal/g?C or
J/goC
38Units of Heat and Energy
- q mc?T
- q heat change
- m mass
- c specific heat
39Units of Heat and Energy
- Calculate q when 28.6 g of water is heated from
22.0C to 78.3C. (cwater 4.184 J/goC) - A.  0.385 kJ
- B.  1.61 kJ
- C.  6.74 kJ
- D.  9.37 kJ
- E.  1.61 103 kJ
40Problem
- Ethylene glycol, used as a coolant in automotive
engines, has a specific heat capacity of 2.42
J/(goC). Calculate q when 3.65 kg of ethylene
glycol is cooled from 132C to 85C. - A.  -1900 kJ
- B.  -420 kJ
- C.  -99 kJ
- D.  -0.42 kJ
- E.  -4.2 10-6 kJ
41Density
- Density relates the mass of an object to its
volume. - Units
- grams per cubic centimeter (g/cm3) for solids
- grams per milliliter (g/mL) for liquids.
Mass (g)
Density
Volume (mL or cm3)
42Density
- If the gasoline in a full 20.0 gallon tank weighs
116 lb, what is the density of gasoline in g/mL - How many grams does 1.2 L of water weigh, if at
room temperature water has a density of 0.9970
g/cm3
43Optional Homework
- Text - 2.44, 2.45, 2.46, 2.47, 2.48, 2.50, 2.52,
2.54, 2.56, 2.58, 2.62, 2.64, 2.66, 2.68, 2.70,
2.72, 2.74, 2.78, 2.88, 2.90, 2.96, 2.106 - Chapter 2 Homework - found online