Fluid Bed Dryer

1
J K Industries

• Fluid Bed Dryer

2
Introduction

• It is most suitable for drying granular,
  crystalline, coarse or similar material
• It is designed to dry pharmaceutical, fine
  chemicals, dyes, food and allied products
• It is not suitable for liquid or pasty material
• Electrically / Steam heated and Thermic Fluid
  heated structure
• Standard Model Made out of mild steel and
  colored
• GMP Model Made out of S.S.304 quality material
  and polished to matt finished
• Contact Parts Product Container and Retarding
  Chamber made out of S.S.304/S.S.316 quality
  material
• The non flameproof blower motor is available

3
How it Works?

• The base of the container filled with material,
  is heated with hot air stream
• The fresh air is sucked using a blower and it is
  heated by electrical heaters or thermic fluid
  heaters
• The hot air expands into bed of material and
  create a dry atmosphere
• This phenomenon is known as fluidization

4
Tray Dryer v/s Fluid Bed
Dryer

• Tray Dryer

• Fluid Bed Dryer

• It requires large floor space
• Drying time is very high
• It is difficult to operate
• There is some loss of heat

• It requires less floor space compare to tray
  dryer
• It takes less time to dry the material
• It is very easy to operate
• There is no loss of heat

5
Other Important Points

• Temperature can be distributed and heat transfer
  rate is high
• High production can be achieved
• Products physical and chemical properties
  remains
• It is effective for heat sensitive products
• Continues movement of product minimizes lump
  formation, case hardening etc.

6
Silent Features

• Uniformity in drying and reduction in drying time
• In electrically heated model, digital temperature
  controller for inlet air and digital temperature
  indicator for outlet air
• In steam / thermic fluid heated model, only a
  digital temperature indicator provided for inlet
  and outlet air
• You can control the flow of inlet and outlet air
  manually
• Full safety provided with the machine

7
Optional Features

• PRE / MICRO V HEPA filters are provided on
  demad
• Pneumatic system for lifting of product container
• Flameproof motor with flameproof enclosure
• Safe earthing arrangement
• Extra product container with trolley
• Pneumatically operated inlet and outlet dampers

8
Contact Us

• J K Industries
• Address
• Plot No I, 15/5, G.I.D.C.
• Near Chirag Cinema, National Highway
• Kalol 382721
• Phone [phone]
• Mobile [phone]
• E-mail info_at_jkindus.com
• Website http//www.jksparklerfilterpress.com