Anchor Stencil

1
Anchor Stencil

• Anchor stencil masks are made use of for sign
  manufacturing. Anchor stencil mask items are
  offered from McLogan in 3 forms. Each item is
  created to permit sign makers to apply a cut
  stencil with the proper amount of adhesion.

2
116 Anchor Stencil Mask

• Mask is a high-tack adhesive for use on raw wood
  areas and urethane foam board. Features trimmed
  sides and a sturdy, clear film liner that
  provides easy alignment and smooth, specific
  cutting on computerized sign-making machines.
  This stencil has a really assertive adhesive and
  is not recommended for usage on some wood without
  testing a sample piece. DO NOT usage on
  pre-painted, pretreated or glass surfaces.

3
117 Anchor Stencil mask

• Mask is a medium-tack version of Design 117,
  specifically made for pretreated and pre-painted
  areas. Great for soft timbers without the threat
  of area lift. Can also be used safely on glass,
  tile and pretreated urethane foam board. Trimmed
  edges permit hassle-free, accurate monitoring
  with electronic sign-making equipment. A turdy,
  clear film liner offers added rigidity.

4
125 Anchor Stencil Mask

• Mask is a high-tack stencil created for
  sandblasting on raw timber and urethane foam
  board. Has easy-release orange liner. The
  durability of the adhesive removes the
  requirement for filler or spray adhesives.

5
CAUTION

• This pattern has a very vigorous adhesive and is
  not recommended for use on some woods without
  initial testing an example piece. Do not select
  on prepainted,pretreated or glass surfaces.

Note It is best to select a 60 degree cutter
when cutting Anchor stencils with plotters.