Safety Consideration In Pallet Racking

1

• Safety Consideration In Pallet Racking
•  

2

• Pallet racking is of course, a kind of material
  handling storage system. It is
• very common nowadays. It is also virtually
  everywhere. Be it in retail
• systems, or manufacturing plants, or even in
  those impressionable high end
• upscale warehouses. Definitions aside, the next
  most important thing to be
• considered as far as pallet racking is concerned
  are the safety factors.
• Although this is purely a material storage
  system, as in most cases people
• are definitely involved. And after having the
  system all figured out and
• planned out down to a T, the next most important
  thing to be taken to
• attention of course is safety.
•  
• Close and meticulous attention should always be
  focused on the loose
• components of any pallet racking system. In
  essence the presence of any
• parts or components that are loose should be
  removed. If any, they should
• be rectified right away and sorted out and
  eliminated for good. Time should
• always be taken to report any damages, regardless
  of how minimal it is to
• the pallet rack system. Logically, any damage in
  the pallet rack system could
• definitely cause the pallets to fall - and that
  is the last thing anyone could
• ever want.

3

• The next safety measure should be ensured by the
  owner at all
• times. Clear communication between all the people
  that are
• present arounf the system is necessary. The
  ideology is simple.
• Climbing on storage racks is a recipe for
  disaster. Doing such
• might lead to serious unwarranted accidents like
  slips and falls.
• Not only that particularly moment right after
  assembly it
• should never be climbed on - at any cost
  whatsoever.

4

• Always ensure that quality plates are being used.
  Using damaged pallet
• plates are absolutely out of the question. There
  are instances wherein some
• management entities may decide to use pallets
  that have a tendency to
• become faulty or just downright dangerous so that
  they can scrimp out on
• small amounts to be saved or sometimes it may be
  in certain instances that
• the management's concern over health and safety
  is limited. The pallets
• should be inspected regularly for any fractured
  or broken planks, or even for
• stringers. It should also always be checked for
  any possibly risky little details
• like nails protruding from somewhere or worse,
  missing support blocks. It is
• also very important to always ensure that only
  properly motorised
• equipment are being used for the application. If
  not, there is always the
• grave tendency that it would not be adequate and
  accidents may happen.
• Not only may that, using inappropriate equipment
  that results in not getting
• the job done with the efficacy and speediness
  that usually comes with the
• pallet racking system.

5

• And more importantly, the end of aisles should
  never be
• blocked at any instance and at all times. Thus,
  staging pallet
• racks in these areas is just unacceptable and
  should never be
• practiced at all, by all means. If this occurs
  the high of severe
• injury or a fatality is extremely high. Quite
  clearly the health
• and safety of emplyees should be maintained -
  most especially
• when it comes to weight requirements. Overloading
  is a no-no.