When you first get your camera:

1
(No Transcript)
2
When you first get your camera

• Charge the battery pack
• Install the battery pack

3
Install battery pack
Open (Batt)
Insert Battery
4
Power Up
Insert Floppy Disk
Power On
Camera Mode
5
Using the Control Button

• Press the top, bottom, or right sides of the
  control button to highlight menu selections
• To select an option once it has been highlighted,
  press the center of the control button

6
Set the date and time

• Turn on the camera
• Press the control button and select menu

• Highlight Clock Set
• Change the date if needed
• Select Enter

7
Ready - Set - Shoot
Insert Floppy Disk
Power On
Camera Mode
8

• Remove lens cover

• Press the shutter button half way down. A green
  dot on the LCD indicates ready
• Press the shutter button fully down to record the
  image

9
Play back images

• Slide camera button to Play
• Highlight and select the left or right arrows to
  choose previous or next images
• Highlight and select Index to display thumbnail
  pictures

10
You Have a Picture!!
Eject the disk The disk eject button is located
to the bottom left of the Control Button. Hold
down the PUSH button and slide the DISK EJECT
button to the left. The disk should pop out.
Turn power OFF.