SAMA GROUP Member of Centro Inox

1
SAMA GROUPMember of Centro Inox The Italian
Stainless Steel Development Association
2
Production Plants

• SAMA S.p.A
• Via Regone,54 20078 San Colombano al Lambro
  (MI)
• Tel.[phone]
• Fax[phone]
• info_at_samainox.it

SAMA FILO INOX S.r.l. (UNIT 1) Via
Erbognetta,122 27039 Sannazzaro dè Burgondi
(PV) Tel.[phone] Fax[phone]
info_at_samainox.it
SAMA S.p.A Via Mendosio 20081 Abbiategrasso
(MI) Tel.[phone] Fax[phone] info_at_s
amainox.it
SAMA FILO INOX S.r.l. (UNIT 2) Via
Addetta,2 20067 Tribiano (MI) Tel.[phone]
6 Fax[phone] info_at_samainox.it
3
Commercial Offices

• S.A.M.A. S.p.A.
• Via Leopardi 7/d
• 22036 Erba (CO)
• Tel [phone]
• Fax 39.031.611.723
• S.A.M.A. S.p.A.
• Via Regone 54
• 20078 S. Colombano al Lambro (MI)
• Tel. [phone]
• Fax [phone]
•  
• AÇOS REUNIDOS
• Núcleo Empresarial
• da Quinta da Portela, 34
  Guerreiros

SLORFELT TRADING Västra
Hungvik Fjordviken 67195 KLÄSSBOL (S)
E-mail mats_at_enervit.se Tel [phone]
Fax [phone]   DELTA
CELIK DIS TICAREST LTD STI
Dogu Mah.Bilge Sokak,2/6 34890
PENDIC ISTANBUL (TR) E-mail
selcuk_at_deltacelik.com Tel.
90.21.659.10.407
Fax [phone]
4
Commercial Offices Warehouses

• S.A.M.A. S.p.A. Via Polonia, 35      35127
  CAMIN (PD)    Tel. [phone]      Fax
  39.049.87.01.976
•  
• S.A.M.A. S.p.A.     Via N. Salieri, 17/e
      40024 CASTEL SAN PIETRO TERME (BO)
       Tel. [phone]     Fax
  39.051.59.51.975
•      SAMA ACEROS S.L.
•   Calle Luis Morondo 8 Bajo
• 31006 PAMPLONA -NAVARRA- (E) E-mail
  ialberdi_at_samaaceros.com Tel. [phone]
• Fax [phone]

•  
• KSM SAMA DE GmbH     Stahl-und
  Metallhandelgesellschaft     
  Rudolf-Diesel-Str.12      72186 EMPFINGEN
  (D)      E-mail e.schick_at_ksmsama.de    
  Tel. [phone]     Fax
  49.748.597.7118
•            
• BFS SAMA UK LTD     Unit 2,
  Prospect Drive Industrial      Estate Boley
  Park      WS14 9UX LICHFIELD STAFFORDSHIRE
  (GB)      E-mail mick_at_barfort.co.uk     
  Tel. [phone]     Fax
  44.15.434.20.201

5
Products

• Drawn in round coils
• Drawn in bars
• Squares Hexagons - Rounds
• Peeled and rolled bars
• Ground bars

6
Cycles of Production
Rolled Coil
Drawn Coil (C / AC)
Drawn Bar (C)
Heat Treatment (CA)
Non Destructive Test
Drawing (CAC)
Grinding (SL)
Circograph/Defectomat/Ultrasonic
EN 10278
7
Cycles of Production

• Rolled Bar

Peeling (SH)
Non Destructive Test
Grinding (SL)
Circograph/Defectomat/Ultrasonic
EN 10278
8
Production Range
Products Sizes mm Tolerances
Drawn coils ? 1.6 ? 15 mm h9 h11
Drawn round bars ? 3 ? 30 mm h9 h11
Drawn square bars 8 ? 60 mm h11
Drawn hexagonal bars 8 ? 60 mm h11
Peeled bars ? 20 ? 120 mm h9 h11
Ground bars ? 3 ? 120 mm h6 h7 h8 h9
(Special tolerances on demand) (Special tolerances on demand) (Special tolerances on demand)
9
Qualities

• STAINLESS STEELS EN 10088-3

Austenitic (Cr-Ni / Cr-Ni-Mo)
Austenitic Low Nickel ( 200 series)
Ferritic (Cr / Cr-Mo / Cr-Nb)
Martensitic (Cr / Cr-Ni / Cr-Mo / Cr-Mo-V)
10
SPECIAL STEELS
Ball Bearing Steels EN 683-17
Free-cutting Steels EN 10277-3
Casehardening Steels EN 10277-4
Micro-Alloyed Steels EN 10267
Quenched and Tempered Steels EN 10277-5
11
Mix of Production Quantities / Qualities
12
(No Transcript)
13
Volume
14
Stainless Steels Volume for group
Austenitic/Duplex
Martensitic
Ferritic
15
(No Transcript)
16
Special Steels Volume for group
Free Cutting Steels
Alloyed / Micro-Alloyed
Ball Bearing Steels
17
Mission of the Company
The market in which we operate is very
extensive, for volumes and applications. In the
past few years different external factors have
caused variations in the short/middle period of
time, but our ambitions are to focalize on points
that we define fundamental and in which we are
always engaged to improve our performances. The
factors mentioned are the following
18
COMPETITIVENESS

• Relationship with suppliers of raw material
• Delivery time quick, punctual
• Flexibility
• Quality of the products
• Availability of raw material/finished products
• Logistics
• Technical assistance before and after sale
• Technological Investments
• Relationship with Customers
• Reduction in costs

19

• Thank You
• Sales Manager Director