Title: Sheetrock repairs houston
1Sheetrock repairs houston
- 9113 Harbor Hills Dr Houston, TX 77054
- (713)-998-9306
2(No Transcript)
3 Mighty Does Bio
- Hello my name is Mighty doesand I thought it
would be kinda cool to start a blog about what is
really more of a traditional handyman topic--
repairing drywalls in your home. Now you can
always hire a contractor to do it for you of
course, but truthfully this job is more of a Do
It Yourself sort of task, even if you're a
housewife or a sports gal. If you lack the
necessary supplies in your garage, you can always
go buy a kit to get you started.
4Dry wall damage can be repaired easily as long as
one has the right tools for dry wall repair.
Therefore one must purchase a dry wall repair
kit. You can measure the size of the hole in your
wall and visit a local hardware store or home
improvement store in order to purchase a dry wall
repair kit. There are a number of different sizes
and types available for various applications. For
instance, a dry wall repair patch for a ceiling
is thicker as opposed to the one for a wall.
5- Drywall ceiling repair happens for a number of
reasons such as cracks, water stains, holes and
exposed nails are fairly common among most
homeowners. Even though drywall ceiling repair
may seem like a daunting and difficult task, it
is quite simple and easy as long as you have the
basic skills, the necessary tools and the
suitable materials for the job. In this article,
we will show you how to repair a drywall ceiling
in detail.
6- Next, make use of a spackling compound or joint
compound in order to hold the dry wall repair
patch in place. Apply the compound on the back of
the drywall patch along with the edges and attach
the dry wall repair patch into the hole and
adjust it in such a way that it is exactly level
with the rest of the wall surface. Hold the dry
wall repair patch in place until the compound
starts to set and allow the compound to dry
thoroughly and completely overnight. Finally, in
order to complete the dry wall repair, use
high-grade sand paper on a sanding block and sand
the area lightly until the surface is smooth,
following which clean the area with a wet sponge
to do away with any dust that is usually caused
by dry sanding. You may apply additional coats of
joint compound if required, but remember to
lightly sand the area after each coat.
7Please visit our website,
http//mightydoes.com/
- In order to carry out drywall ceiling repair, you
should use a drywall saw to cut and clear the
damaged area, After, use a utility knife to cut
out a replacement piece of drywall that will fit
into the hole. One needs to make use of drywall
screws in order to secure and fasten the drywall
to the joist. Subsequently, apply a thin layer of
joint compound over the joints as well as the
screws and place a piece of drywall tape on the
still wet compound around the joint.