Max Ox Hot Air Furnace and Boiler

1
Max OxHot Air Furnace and Boiler
St Joseph Heating Solutions Manufacturer logos,
trademarked names, photos, and information used
within this presentation remain the sole property
of the registered party and/or St Joseph Heating
Solutions.
2
Max Ox Furnace
3
Max Ox Boiler w/o Shielding
4
Max Ox Boiler Primary Piping
5
Control Panel on Max Ox
6
Boiler Touch Screen Overview
7
Optional O2 Senor Display
8
Furnace Touch Screen Overview
9
Max Ox Furnace Menu
10
Forage Box for Chip or Sawdust Unloading Other
automated unloading systems available
Side Material Discharge
11
Automated Feeder Box DriveControlled by Max Ox
PLC
Forage Box for Chip or Sawdust Unloading Other
automated unloading systems available
Forage Wagon Feeder Discharge
12
Hopper Tank for Pellets or 2 Briquettes
Typically feeding the Max Ox using a small
conveyor or auger.
13
High Moisture Fuel
Metering Box
14
Materials Feeder Conveyer
15
Ash Discharge Auger
Burner Head
16
Small Ash Box (Custom sizes available)
17
Yes, it is at Full Fire!!!
18
Specifications

• 900,000 BTU heat output when using high moisture
  wood chips
• Modulating feed auger
• Modulating induced draft fan
• Modulating 14,000 CFM blower for furnace
• Modulating 125 GPM primary circulator for boiler
• PLC (Programmable Logic Controller) with 6 touch
  screen control
• Automatic ash removal - standard
• Full graphic display on touch screen allowing the
  user to see what percentages the motors are
  running at, along with full display of stack
  temperature, plenum temperature, room
  temperature set point, and in-feed fuel conveyor
  parameters (02 sensor optional)
• Small footprint Length - 14' (including metering
  bin and auger), Width - 5', Height 10'6"
• Combustion chambers are poured refractory to
  handle the high temperatures
• Primary and secondary combustion air creating
  gasification effect which eliminates smoke
  emissions.
• Complete unit (fully assembled) can be moved with
  a forklift
• Easy access to heat exchange tubes for cleaning
  purposes
• 1 year warranty on the entire unit including
  electrical components
• 1 day start up at the customers site by our
  technician
• Made in PA by quality minded people with quality
  materials at a quality price
• Measured combustion efficiency _at_ 83
• Mains electrical circuit requirement 60 amp
  240v. single phase running current at max output
  - _at_ 25 amps
• Rated fuels up to 50 moisture wood chips lt
  1.5, Briquettes lt 2 diameter x 1 length,
  wood shavings, cotton gin byproducts (loose or
  briquetted), construction/demolition waste
  (C/D) lt 1.5

19
Questions
St Joseph Heating Solutions 10645 Hall School
Road Owensboro, KY 42301 1-877 HEAT IT
UP (1-877-432-8488) 270-929-7419
Rick/Mobile [phone] Fax
www.stjosephky.com
NOTE Manufacturer logos, trademarked names,
photos, and information used within this
presentation remain the sole property of the
registered party and/or St Joseph Heating
Solutions.