WA5600 Installation Overview

1
WA5600 Installation Overview
2
WA5600 Mortise Lock Installation

• WA5600 Primary Issues
• Improper strike install
• Improper strike box prep
• Loctite 262 on handing screw
• Cam dot alignment
• WA5694 Autobolt

3
Re-handing a Mortise Lock
1
2
3
4
Re-handing a Mortise Lock, contd
Use Loctite 242
4
5
6
5
Lock Handing Screw and Cam Dot

• a. The lock handing screw (a) must be screwed
  into the lock from the inside (opposite the
  cylinder). If not, remove it and install it on
  the other side.
• b. Be sure the dot on the cam (b) is facing down
  when installing the lock handing screw.

6
Installing the Key Cylinder
7
Spring Cage Installation
8
(No Transcript)
9
(No Transcript)