Introduction%20to%20DART%20MS - PowerPoint PPT Presentation

About This Presentation
Title:

Introduction%20to%20DART%20MS

Description:

Resolving power defines how well the mass spectrometer can ... Off-axis skimmers and ring lens, bent ion guide. Keep contamination out of high-vacuum region ... – PowerPoint PPT presentation

Number of Views:1070
Avg rating:3.0/5.0
Slides: 86
Provided by: drrobe
Category:

less

Transcript and Presenter's Notes

Title: Introduction%20to%20DART%20MS


1
Introduction to DART MS
  • Robert B. Cody
  • JEOL USA, Inc.

2
Outline
  • Definition of terms
  • DART operating principle
  • TOF mass spectrometer overview
  • The information we obtain

3
Definitions of MS terms and general concepts
4
High Resolution Mass Spectrometry
  • We will be using exact-mass measurements to to
    confirm knowns and to determine elemental
    compositions for unknowns
  • Resolving power defines how well the mass
    spectrometer can separate close peaks
    (interferences)
  • The elemental composition software gives us other
    information for each candidate composition (e.g.
    unsaturation)

5
Resolving Power
  • R M / DM
  • R Resolving Power
  • M m/z
  • DM difference in mass that can be separated

6
Resolving Power Defined as FWHM (Full width at
half maximum)
R M / DM R 5000 m/z 500 DM Peak width at
half-height 0.1
7
Resolving Power Defined as 10 Valley Definition
R M / DM R 500 m/z 500 and 501 can be
separated at a 10 Valley DM 1
8
Examples for C36H74 (m/z 506.579)
9
Why the definition matters
R 5000 (FWHM)
10
Mass accuracy
  • millimass units (0.001) or mmu
  • ppm 106 (DM / M)
  • parts-per-million (ppm)
  • Resolution (reciprocal of resolving power)
  • Note ppm is a m/z dependent value

11
Unsaturation (aka rings and double bonds aka
double bond equivalents)
CH3COO- D 1.5, subtract 0.5
H3O D -0.5, add 0.5
C3H7O. D 0.5, add 0.5
C6H6. D 4.0
  • Value is calculated from elemental composition
  • Indicates total rings, double bonds, triple bonds
  • Exact integer (e.g. 4.0) or half-integer (3.5)

12
Examples of Even-electron ionsand Odd-electron
ions
  • Even-electron ions (half integer unsaturation)
  • Protonated molecule MH
  • Deprotonated molecule M-H-
  • Chloride adduct MCl-
  • Ammoniated molecule MNH4
  • Fragment F
  • Odd-electron ions (exact integer unsaturation)
  • Molecular radical cation M.
  • Molecular radical anion M-.
  • Fragment F .

13
On-line Resources
  • DART Users Google Newsgroup
  • http//groups.google.com/group/dart-mass-spectrome
    ter-users?hlen
  • JEOL USA, Inc. Web Pages
  • http//www.jeolusa.com
  • IonSense Web Page
  • http//www.ionsense.com
  • Wikipedia article on DART
  • http//en.wikipedia.org/wiki/DART_ion_source
  • Proton affinities, ionization energies (NIST)
  • http//webbook.nist.gov/chemistry/

14
DART Basic Principles
See the JEOL News Article on the AccuTOF-DART
product page on www.jeolusa.com
15
DARTDirect Analysis in Real Time
  • Operational in Jan. 2003
  • Patent filed in April 2003
  • Public disclosure, Jan. 2005
  • Commercial product introduced March 2005
  • First open-air, ambient ion source for MS

1. Cody, R. B. Laramee, J. A. Method for
atmospheric pressure ionization US Patent
Number 6,949,741 issued September 27, 2005. 2.
Laramee, J. A. Cody, R. B. Method for
Atmospheric Pressure Analyte Ionization US
Patent Number 7,112,785 issued September 26,
2006.
16
Prototype DART sources
Original prototype DART source (mid-2002)
Second DART prototype(Early 2003)
17
The Whole PackageAccuTOF-DART
18
Why DART?
  • Fast and easy way to introduce samples
  • Minimal sample preparation for most samples
  • Can tolerate dirty or high-concentration
    samples and without contamination
  • Fast fingerprinting of materials

19
Nothing comes without a price
  • Chromatography/MS still has advantages over DART
    in detection limits, selectivity and sensitivity
    for certain samples
  • Not useful for large biomolecules (no good for
    DNA analysis, proteins)
  • DART does not ionize metals, minerals, etc.

20
DART Schematic
21
DART Ionization
Penning ionization Sample ionized directly by
energy transfer from metastables (M) Proton
transfer (positive ions) 1. He ionizes
atmospheric water 2. Ionized water clusters
transfer proton to sample Electron capture
(negative ions) 1. Penning electrons rapidly
thermalized 2. Oxygen captures electrons 3. O2-
ionizes sample
M
DART Source
MS API Interface
22
Penning Ionization
  • Metastable atoms or molecules react with analytes
    that posses ionization potentials less than the
    metastable energy,
  • M S ? S. M electron
  • The helium 23S state has 19.8 eV of internal
    energy and lasts up to 8 minutes in vacuum.
  • Most molecules have ionization energies much
    lower than 19.8 eV

23
Proton Transfer
He(23S) H2O ? H2O He(11S) electron H2O
H2O ? H3O OH H3O nH2O ?
(H2O)n1H (H2O)nH M ? MH nH2O
  • Metastable atoms react with atmospheric water to
    produce ionized water clusters
  • Dominant reaction mechanism when helium carrier
    used He(23S) energy 19.8 eV
  • Huge reaction cross section 100 A2

24
Typical DART Low-Mass Background
25
Negative Ion Formation
  • Electrons produced by direct or surface Penning
    ionization are rapidly thermalized
  • Thermal electrons react with atmospheric oxygen
    and water to produce ionized clusters
  • Oxygen/water cluster ions react with analyte
    molecules to produce analyte ions
  • e- G ? e- G
  • e- O2 ? O2-.
  • O2-. S ? S-H- OOH.
  • O2-. S ? S-. O2
  • O2-. S ? SO2-. G ? SO2-. G

26
Typical DART Negative-IonLow-Mass Background
Note the absence of nitrogen oxide ions that
would be produced by electrical discharge in air.
NO2- and NO3- are problematic for detection of
nitro explosives and reduce anion detection
sensitivity
27
Example
Ascorbic acid, C6H8O6
Sampled directly from a melting point tube
28
Notes on the AccuTOF Design and Operation
See the JEOL News Article on the AccuTOF-LC
product page on www.jeolusa.com
29
Types of mass spectrometers
  • Scanning
  • magnetic sector, quadrupole and triple quadrupole
  • Trapped-ion
  • Fourier transform, 3D ion trap, Orbitrap
  • linear trap (used in triple quadupole MS)
  • Time-of-flight
  • Hybrids

30
DART can be fit on most mass spectrometer types
  • DART signals can be transient, so,
  • scanning mass specs work best with selected ion
    monitoring or fast scanning
  • Selected reaction monitoring on triple quadrupole
    MS is good for target compound quantitation.
  • Ion traps work, but are not a good choice for
    quantitative analysis
  • Time-of-flight is fastest MS for transient
    signals, and gives high-resolution data for the
    entire mass spectrum with no sensitivity loss.

31
Time of flight principle
Detector
Light ions moving quickly
If everyone starts at the same time and has the
same kinetic energy, lighter riders will move
faster
Heavy ions moving slowly
32
A more realistic TOF mass spectrometer
Ion source Short burst of ions
Ion detector
Flight tube
High voltage to accelerate ions
Kinetic Energy qE mv2/2
33
What if ions that have the same mass have
slightly different energies?
  • Reflectron make the more energetic ions travel
    further

34
Reflectron Time of flight mass analyzer principle
1. Fast riders miss the turn
Lance
Me
35
Reflectron Time of flight mass analyzer principle
2. Fast riders turn around have to travel further
36
Reflectron TOF
3. Fast riders start to catch up
37
Reflectron TOF
Focal point
4. Fast riders catch up, will eventually pass
38
Time-of-flight math
  • All ions fly with the same kinetic energy.
  • Flight time is inversely proportional to the
    square root of the mass/charge ratio.

M mass of ion u mu Atom mass unit (1.6605 x
10-27 kg/u) v flight speed of ion m/s q
charge number of ion e unit electric charge
(1.602 x 10-19 C) V Accelerating voltage V
39
JMS-T100LC AccuTOFTM
40
AccuTOFTM Ion Source
41
Orthogonal ESI ion source and API interface
42
Ion Source and Atmospheric Pressure Ionization
(API) Interface
  • Orthogonal ESI
  • Minimize contamination into API interface
  • Simple API interface
  • Robust, few parameters, minimal maintenance
  • Off-axis skimmers and ring lens, bent ion guide
  • Keep contamination out of high-vacuum region

43
AccuTOFTM Ion Transport
44
Ion transport region
  • Strong acceleration of ions only occurs in
    high-vacuum region
  • Minimize CID and scattering
  • Quadrupole RF ion guide focuses ions to a small
    spot size
  • Spatial focus for good resolution
  • High-pass filter (ions greater than given m/z)
  • Multi-function focusing and steering lenses
  • Beam should be perpendicular

45
AccuTOFTM Analyzer
46
AccuTOFTM Analyzer
  • Two-step acceleration
  • Spatial focusing of ion beam
  • Single reflectron
  • Energy focusing of ion beam in the x-direction
  • Minimize ion loss
  • oa(Orthogonal-Acceleration)-TOF MS
  • Kinetic energy spread in y-direction has no
    effect on resolution
  • The ions produced by the ESI ion source are used
    efficiently.

47
Flight cycle of oa-TOF MS
  • 1. Introduction of ion
  • Two kinds of ions are introduced at the same time.

Low mass ion High mass ion Mixture of both ions
48
Flight cycle of oa-TOF MS
  • 2. Turn on the pulser voltage
  • Mixture of ions at the start of flight

49
Flight cycle of oa-TOF MS
  • 3. Turn off the pulser voltage
  • continuing flight - mass separation

50
Flight cycle of oa-TOF MS
  • 4. Continuing flight
  • New ions are introduced in the ion acceleration
    part.

51
Flight cycle of oa-TOF MS
  • 5. Low mass ion reaches detector
  • The ion acceleration region is filled with the
    new ions.

52
Flight cycle of oa-TOF MS
  • 6. High mass ion reaches detector

53
Flight cycle of oa-TOF MS
  • 7. The detection of all ions is completed

54
AccuTOFTM Detection system
55
Detector
  • Micro-channel plate (MCP)
  • 40mmf
  • Dual MCP
  • Anode
  • Combined with high voltage capacitor
    Patent pending

56
MCP
  • Diameter40mm
  • Thickness0.6mm
  • I.D. of channel10µm
  • Gap of each channel12µm

57
Data collection system for oa-TOF MS
- Requirements -
  • High time resolution
  • m/z 609, R6,000 ? Peak width 3.5ns
  • Continuous data collection
  • High duty cycle
  • Real-time accumulation of mass spectrum

58
Data collection system for oa-TOF MS
  • Continuous Averager
  • A signal from the detector is converted digital
    value by a high-speed ADC (Analog-to-Digital
    Converter).
  • Spectrum can be accumulated continuously in real
    time.
  • TDC
  • Super-high speed digital stop watch
  • Measures the arrival time of ions
  • A premise is that there are a few ions
  • Each ion arrives separately.
  • Ion counting detection signal is 0 or 1.

59
TDC (Time-to-Digital Converter)
60
Simulation of spectrum accumulation by TDC
61
Simulation of spectrum accumulation by TDC
62
Simulation of spectrum accumulation by TDC
63
Simulation of spectrum accumulation by TDC
The ion which had about two times higher
intensity was detected.
It is counted only once (not twice) with TDC.
64
Simulation of spectrum accumulation by TDC
Two ions detected in succession!
The second ion can't be counted during dead time.
65
Result of spectrum accumulation by TDC
  • The ratio of the peak intensity isn't correct.
  • A high intense peak shifts to low mass side.

66
Continuous Averager
67
Simulation of spectrum accumulation by continuous
averager
68
Simulation of spectrum accumulation by continuous
averager
69
Simulation of spectrum accumulation by continuous
averager
70
Simulation of spectrum accumulation by continuous
averager
71
Simulation of spectrum accumulation by continuous
averager
72
Result of spectrum accumulation by continuous
averager
  • The ratio of the peak intensity is correct.
  • There is no shift of the ion peak.

73
Specifications
  • Mass resolution 6,000
  • FWHM, Reserpine m/z 609
  • Sensitivity Reserpine 10pg S/Ngt10
  • LC-ESI Flow rate 0.2mL/min
  • Mass chromatogram of m/z 609, RMS
  • Mass accuracy 5ppm RMS
  • With internal reference
  • (Typically better than that!)

74
Only 3 analyzer parameters are critical for
routine DART analysis
1 Orifice 1 2 Peaks voltage 3. Multiplier V
75
The 3 important parameters
  • 1 Orifice 1 Typically 20V
  • Increase O1 to increase fragmentation
  • 2 Peaks voltage (RF ion guide voltage)
  • Divide by 10 to estimate lowest detected m/z
  • 3. Multiplier V Typically 2200V to 2600V
  • Increase multiplier to increase signal (and
    noise)

76
Information from the TOF mass spectrum
  • Exact mass isotope peaks elemental composition
  • Fragmentation distinguish isomers
  • Fingerprint pattern material ID
  • Ion abundance quantitative analysis
  • Other experiments H/D exchange, derivatization,
    etc.

77
Example DART mass spectrum of a leaf
What is this?
304.154
290.174
78
We can treat this as an unknown
79
Elemental compositions
Measured Exact Mass
Constraints
Candidate compositions
Isotope pattern matching
Ranked compositions
Elemental Composition Program
80
We have a composition. Now what?
  • m/z 304.1548 is C17H22NO4

Cocaine
Scopolamine
Fragments at m/z 182, 82
Fragments at m/z 138, 156
138
C8H12NO
156
182
C8H14NO2
C10H16NO2
81
API interface change potentials to induce
fragmentation
82
Fragment spectrum increase cone voltage from 20 V
to 60 V
Atropine
Scopolamine
290.174
C8H12NO
C8H14NO2
Scopolamine
156.099
138.089
304.154
C8H14N
83
For comparison, m/z 305.1548 fragments from a
dollar bill
Cocaine
C10H16NO2
C17H22NO4
C5H8N
84
orwe can search for candidates from a list of
target compounds.
Components in a smokeless powder
SearchFromList Program
85
Whew!Confused? Itll make more sense when
you see it in the lab.
Write a Comment
User Comments (0)
About PowerShow.com