CompTIA Network+ N10-006 Sample Questions

1
CompTIA Network N10-006
Special Discount Offer
5discount
Your Discount Code is

• Certification Exam Questions And Answers

2
CompTIA N10-006 Exam Introduction

• The CompTIA Network certification is an
  internationally recognized validation of the
  technical knowledge required of foundation-level
  IT network practitioners.CompTIA Network is
  accredited by ANSI to show compliance with the
  ISO 17024 Standard and, as such, undergoes
  regular reviews and updates to the exam
  objectives.

Test Purpose This exam will certify that the
successful candidate has the knowledge and skills
required to trouble shoot, configure,and manage
common network wireless and wired
devices,establish basic network design and
connectivity, understand and maintain network
documentation,identify network limitations and
weaknesses,and implement network security,
standards,and protocols.
3
CompTIA N10-006 Exam Candidates

• It is recommended for CompTIA Network candidates
  to have the following
• CompTIA A certification or equivalent knowledge,
  though CompTIA A certification is not required.
• Have at least 9 to 12 months of work experience
  in IT networking.

4
CompTIA N10-006 Exam Objectives

• The given table lists the domains measured by
  this examination and the extent to which they are
  represented. CompTIA Network exams are based on
  these objectives.

Domain of Exam
Network architecture 22
Network operations 20
Network security 18
Troubleshooting 24
Industry standard , practice, and network theory 16
TOTAL 100
5
CompTIA N10-006 Exam QA

• Realbraindumps Presenting you the Real test
  Questions Answers Pack (Pdf File).

6
CompTIA N10-006 Sample QA

• QUESTION NO 1
• Multiple students within a networking lab are
  required to simultaneously access a single switch
  remotely. The administrator checks and confirms
  that the switch can be accessed using the
  console, but currently only one student can log
  in at a time. Which of the following should be
  done to correct this issue?

• A. Increase installed memory and install a larger
  flash module.
• B. Increase the number of VLANs configured on the
  switch.
• C. Decrease the number of VLANs configured on the
  switch.
• D. Increase the number of virtual terminals
  available.

AnswerD
7
CompTIA N10-006 Sample QA

• QUESTION NO 2
• A user with a 802.11n WLAN card is connected to a
  SOHO network and is only able to connect at 11
  Mbps with full signal strength. Which of the
  following standards is implemented on the network?

• A. 802.11a.
• B. 802.11ac.
• C. 802.11b.
• D. 802.11g.

AnswerC
8
CompTIA N10-006 Sample QA

• QUESTION NO 3
• Which of the following would be used in an
  IP-based video conferencing deployment? (Select
• TWO).

• A. RS-232.
• B. 56k modem.
• C. Bluetooth.
• D. Codec.
• E. SIP

AnswerD,E
9
CompTIA N10-006 Sample QA

• QUESTION NO 4
• A wireless network technician for a local retail
  store is installing encrypted access points
  within the store for real-time inventory
  verification, as well as remote price checking
  capabilities, while employees are away from the
  registers. The store is in a fully occupied strip
  mall that has multiple neighbors allowing guest
  access to the wireless networks. There are a
  finite known number of approved handheld devices
  needing to access the store's wireless network.
  Which of the following is the BEST security
  method to implement on the access points?

• A. Port forwarding.
• B. MAC filtering.
• C. TLS/TTLS.
• D. IP ACL.

AnswerB
10
CompTIA N10-006 Sample QA

• QUESTION NO 5
• A technician just completed a new external
  website and setup access rules in the firewall.
  After some testing, only users outside the
  internal network can reach the site. The website
  responds to a ping from the internal network and
  resolves the proper public address. Which of the
  following could the technician do to fix this
  issue while causing internal users to route to
  the website using an internal address?

• A. Configure NAT on the firewall.
• B. Implement a split horizon DNS.
• C. Place the server in the DMZ.
• D. Adjust the proper internal ACL.

AnswerB
11
CompTIA N10-006 Sample QA

• QUESTION NO 6
• A technician needs to ensure that new systems are
  protected from electronic snooping of Radio
• Frequency emanations. Which of the following
  standards should be consulted?

• A. DWDM.
• B. MIMO.
• C. TEMPEST.
• D. DOCSIS.

AnswerC
12
CompTIA N10-006 Sample QA

• QUESTION NO 7
• When a client calls and describes a problem with
  a computer not being able to reach the
  Internet,in which of the following places of the
  OSI model would a technician begin
  troubleshooting?

• A. Transport layer.
• B. Physical layer.
• C. Network layer.
• D. Session layer.

AnswerB
13
CompTIA N10-006 Sample QA

• QUESTION NO 8
• A network engineer is troubleshooting an issue
  with a computer that is unable to connect to the
  Internet. The network engineer analyzes the
  following output from a command line utility
• Network DestinationNetmask Gateway Interface
• 192.168.1.0 255.255.255.0 192.168.1.254 eth0
• 192.168.1.10255.255.255.255 192.168.1.10 eth0
• 127.0.0.1255.0.0.0 On-Link lo
• 127.0.0.0255.0.0.0 On-Link lo
• 255.255.255.255255.255.255.255 102.168.1.10 eth0
• Which of the following is the reason for the
  computer issue, given the above output?

• A. Wrong default gateway netmask.
• B. Incorrect default gateway address.
• C. Default gateway on the wrong interface.
• D. Missing default gateway.

AnswerD
14
CompTIA N10-006 Sample QA

• QUESTION NO 9
• A technician has finished configuring AAA on a
  new network device. However, the technician is
• unable to log into the device with LDAP
  credentials but is able to do so with a local
  user account.Which of the following is the MOST
  likely reason for the problem?

• A. Username is misspelled is the device
  configuration file.
• B. IDS is blocking RADIUS.
• C. Shared secret key is mismatched.
• D. Group policy has not propagated to the device.

AnswerC
15
CompTIA N10-006 Sample QA

• A. All routers are using hop count as the metric.
• B. All routers have the same routing table.
• C. All routers learn the route to all connected
  networks.
• D. All routers use route summarization.

• QUESTION NO 10
• When convergence on a routed network occurs,
  which of the following is true?

AnswerC
16
Best of Luck For Your Future

• We and Our Team wish All Our Customers All The
  Best For Their Exam as well as for Their future.