PRODUCT LINK https//www.robomart.com/battery-cha rgers-adaptors-eliminators
2 INTRODUCTION
The Arduino Uno R3 Power supply is a microcontroller board based on
the ATmega328P.
It has 14 digital input/output pins (of which 6 can be used as PWM
outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a
power jack, an ICSP header and a reset button.
It contains everything needed to support the microcontroller
simply connect it to a computer with a USB cable or power it with a
AC- to-DC adapter or battery to get started..
You can tinker with your UNO without worrying too much about
doing something wrong, worst case scenario you can replace the chip for
a few dollars and start over again.
3 Continue
In this modern technology, whether electronic, mechanical or electrical
all of these require some backup.
For backup, inventions reached to batteries which worked for longer
hours depending upon device which requires more power.
If power required is more, battery will be dead within few hours and
vice versa. There exist two types of batteries disposable and
rechargeable. In rechargeable, battery is charged when dead and
in disposable battery, cells once dead cant be used again.
4 Continue
Battery eliminators and battery adapters have replaced use of batteries.
Instead of utilizing battery, its better to use eliminators because when connected provide power to your electronic items.
Its used in number of devices especially electronic circuits and caters 9volt DC supply.
We have maintained a renowned approach towards eliminators and powerful battery chargers in India. So without any doubt, quickly grab opportunity and purchase battery as per requirements.
5 HOW IT LOOKS 6 CONTACT US
B5, C-Block, Above IOB Bank, Sec-31,Noida-201301(U P) India