IPHONE BATTERY REPLACEMENT

1
IPHONE BATTERY REPLACEMENT
2

• Did you buy iPhone 6 but faced a battery issue?
  If yes, then you need not to be worried. You can
  easily go to the official Apple store and get it
  change, or you can follow some easy steps and get
  it done by you. Who needs to waste money when one
  can change it with no trouble and difficulty?

3

• All you need is a proper toolkit which contains a
  regular Philips 00 screwdriver, P2 Pentalobe
  screwdriver, tweezers, plastic cards, iOpener,
  iSlack, a suction cup, and a plastic pry tool.
  The following steps can help you bring back your
  phone to life.

4

• back your phone to life.
• It is advisable to remove the front panel and
  then take off the battery. However, if you think
  you can manage without taking it off then move
  on.
• First you need to remove the two 3.6mm Pentalobe
  screws near the lightening connector.

5

• Then open the iSlack. You may see a plastic gauge
  fixed at the center of the iSlack, remove it for
  iPhone 6, and then close the iSlack handles which
  will open the suction cups.
• Then place your phone between both the suction
  cups. Carefully leave the home button on the
  display side when you place the upper suction
  cup. Suction cups will be closed by opening the
  handles of the iSlack. Fix the suction cups
  carefully on the upper and lower side of the
  phone.

6

• Hold the phone and iSlack firmly to separate the
  suction cups and drag the display panel from the
  back case. Carefully strip out the suction cups
  off.
• Use the prying tool and suction cup to separate
  the two pieces.
• Once the display panel is separated, carefully
  remove the suction cup from it.

7
(No Transcript)
8

• Open our phone from the end of the home button
  and move it upward from the rear case.
• Open the display panel to a distance of 90 degree
  angle and slant it with something so it remains
  open. Meanwhile you continue to work on.

9

• Now you will see two Philips screw at the back
  panel in the battery, remove them.
• Now take out the metallic battery connector from
  the phone to take out the battery.
• Now use the plastic prying tool again to lightly
  lever open the battery connector from its opening
  on the logic board.

10

• There are five Philips screws fixed at the other
  end of the iPhone. Carefully remove all five of
  them and note their correct position. In case of
  incorrect placement of any of these five screws,
  there will be an everlasting damage to the logic
  board of your iPhone.
• Disconnect the front camera and sensor cable. Use
  the smooth end of the instrument to separate home
  button cable connector, display data cable
  connector, digitizer cable connector, and
  completely remove the display panel from the back
  case.

11
(No Transcript)
12

• Now take off the first battery joint tab from the
  right bottom rim of the battery.
• Smoothly pull the joint strip of the battery
  towards the bottom side of the phone and slowly
  remove it from the back case and the battery.
• In the same way, pull the second battery joint
  tab.

13

• If you have successfully pulled off both the
  strips, use a plastic card to insert it between
  the back case and the battery. Be careful to
  insert it from the other side and not from the
  logic board. Put the card a bit deeper to break
  the joint strip at the back of the battery.
• Now remove the battery and replace it with a new
  one.

14

• This process may seem longer, but if you do it
  carefully by understanding all the steps, you can
  do it effortlessly.

15

• For more information, visit us

drphonefix.com/pittsburgh-pa
16
(No Transcript)