DIY : How To Make a Powerful Luminous Laser Diode

1
Presents
DIY How To Make a Powerful Luminous Laser Diode
2

• A laser diode is something that is some of the
  first and foremost things youd be making while
  taking the feel of the electronic devices. A
  cheap laser diode driver is something youd be
  requiring. Heres a list of the materials that
  you need while making a powerful burning laser
  diode.

3
(No Transcript)
4

• A powerful laser diode preferably having a data
  sheet would require

• Capacitors
• Diodes
• Ohm resistors
• Voltage regulator
• Veroboard

• Soldering iron
• Solder
• Heat sink
• Switch

5
The laser diode driver circuit contains a laser
diode, capacitors which help in protecting Laser
Diode from immediate fluctuating power supply
especially when switching it on or off. Resistors
if placed in parallel, sets the maximum voltage
and current that the laser diode would get.
6
(No Transcript)
7

• Note the switch must be placed between the
  batteries and the driver.

First, check if all the components are working
properly or not using a multimeter. Place the
components making a circuit and check them first
on a breadboard. Once you figure out that all the
components are working properly, place them on a
PCB and solder it. Check the driver by using a
bulb. Also, make sure to short your capacitors.
8
Analog Technologies, Inc. Address 2352 Walsh
Ave. Santa Clara, CA 95051 Phone
4087489100 Email sales_at_analogti.com Website
http//www.analogtechnologies.com/
Thank You