Get Projector Lamps With Suitable Cheap Housing

1
(No Transcript)
2
Sometimes, you will know when to change the bulb
because one day you will switch on the projector
and it will not work. There are a number of
environmental factors that can shorten the life
of a projector lamp because the bulbs are
delicate objects. Factors such as letting the
bulb cool before moving the projector, not
cleaning the filter or even storing the projector
lamp in a cold or warm place can all shorten its
expected lamp life.
3
When replacing a new lamp into the existing lamp
module housing, a suitably qualified electrician
or on-site professional should only undertake it.
It is important to ensure the terminals are not
over tightened as the ceramic can be cracked and
reduce the electronic insulation of the bulb.
Similarly, if the bulb is under tightened, it can
cause arcing on the terminal, which puts undue
load on the ballast that can lead to failure.
4
Lamp modules are more commonplace and can be
likened to car headlights, where you buy the
"unit" which just slots in. To replace a lamp
module, you simply undue the necessary screws on
your projector, lift out the old lamp module,
insert the new lamp module and tighten the
screws. 
5
Contact Us
MARY STREET, GAWLER EAST SA 5118 Phone- (08)
8223 3448 www.kickstartcomputers.com.au
6
(No Transcript)