Title: MIG Wire (1)
1MIG Wire
- http//www.dnhsecheron.com/
2 Mig Welding Tips
Here is my list of MIG Wire welding tips that I
think can make a real difference to you when you
are using your wire feed welder.
1. Clean materials. You should always work with
clean materials. Make sure that the metal you are
going to weld is clean and free from anything
that can contaminate the weld. Anything like rust
particularly heavy rust, old paint, grease and
any oils need to be removed before you MIG weld
Welding Consumables
3- 2. Earth clamp. The Earth clamp is often
overlooked when people start having mig welding
problems. You've got to understand that when you
are welding you are essentially creating a big
electrical circuit. Any break in the circuit will
cause you troubles. So check your earth clamp to
make sure that everything is secure and that the
contact points are clean. You might need to touch
them up with some sand paper.
Welding Machine
4- 3. Gasless mig wire. It's a known fact that the
self shielding flux core wires make a fair amount
of welding spatter. One of the best things you
can do is to use some anti spatter. It is
available in aerosol cans and liquid form where
you can fill up a spray bottle and squeeze it on
by hand. Another little tip, make sure you get
the least toxic stuff available, some of them are
pretty bad to your health. - 4. Mig welding wire. Use the best possible
welding wire that you can get your hands on.
There's so much rubbish wire out there in the
marketplace that most of the time they do more
damage than good. A good mig wire will be
accurate in its dimension throughout the whole
spool. A decent mig wire will also have a very
good copper coating on it. The wire should never
go over size either.
5- 5. Mig welding tips. If you're having trouble
with bad welds and wire sticking, one area to
look at may be the contact tips. With a lot of
the cheaper contact tips the internal bore of the
hole that the wire has to travel through can be
very rough, course and uneven. This can lead to
erratic and unstable arcs, wire burn backs,
erratic feeding and higher consumable costs. - Sometimes it really does pay just to use genuine
parts. - Article Source http//EzineArticles.com/2646427
6- DH Sécheron is one of the leading welding
manufacturers in India. Incepted in 1966, DH
Sécheron is an ISO 9001-2015 certified company
that offers a comprehensive range of welding
solutions in the form of consumables,
equipment's, training and fabrication. - Get in touch with us on.
- DH Secheron
- Facebook
- Twitter
- Google Plus