Use tracing to find anti-debugging tricks ... to neutraliz

1
IDA and obfuscated code
Hex-Rays Ilfak Guilfanov
2
Presentation Outline

• Is obfuscated code a problem for IDA Pro?
• IDA Pro expects nice proper code
• A lost battle?
• At the first sight, yes
• Solutions exist
• They are numerous...
• Future development
• Your feedback
• Online copy of this presentation is available at
  http//www.hex-rays.com/idapro/ppt/caro_obfuscatio
  n.ppt

3
Sample obfuscated code

• IDA is a static analysis tool and it makes many
  assumptions about the input code
• When these assumptions are violated, the analysis
  goes wrong
• An extremely simple case, call instructions are
  expected to return to the next instruction

problem
The solution will be presented later...
4
Obfuscation categories

• Redundancy
• Blow the code size code cleaning is necessary
• Camouflage
• Hide seek the seeker is to win
• Anti-debugger tricks
• Tricks can be learned even by old dogs
• Since it is just obfuscation, a determined
  reverse engineer will eventually overcome it

5
Redundancy

• Instructions with no effect
• Useless jumps
• Complex computations with a constant result
• Code duplication

6
Instructions with no effect

• In fact CL is zero

7
(No Transcript)
8
Useless jumps

• Text view is pretty useless

9
Useless jumps

• Graph view is slightly better

A plugin to clean the graph and combine adjacent
nodes would be really useful (can be done without
modifying the database)?
10
Graph view and plugins

• Graphs generated by IDA can be modified by a
  plugin on the fly just hook to
  grcode_changed_graph event
• This allows for improving the graph. Some ideas
• Combine sequential nodes into one
• Hide dead code paths
• Remove dead edges
• Add annotations to graph nodes/edges
• Automatically recognize and collapse patterns
  (e.g.strlen)?
• Local optimization (within a node constant
  folding, etc)?
• All this can be really useful for obfuscated code!

11
Constant result calculations

• Some constant calculations can be easily handled

Ctrl-R
12
When there are too many offsets...

• The answer is obvious write a script or a
  plugin )?
• Here's very simple one-line script

OpOffEx(here, 1, REF_OFF32REFINFO_NOBASE, -1,
EBP, 0)?

• To make your life even easier, you may assign a
  script to a hotkey, press Shift-F2 and
  enter
• This trick and many others are explained on
  http//www.xs4all.nl/itsme/projects/disassembler
  s/ida.html

AddHotkey("w", "make_ebp_offset") static
make_ebp_offset()? OpOffEx(here, 1,
REF_OFF32REFINFO_NOBASE, -1, EBP, 0)
13
What if there are thousands of such offsets?...

• Improve the script to check all instructions for
  the desired pattern. Here's how to organize a
  loop over all instructions

auto ea, ea2 ea2 MaxEA() for ( eaMinEA() ea
lt ea2 eaNextHead(ea, ea2) )? if (
!isCode(GetFlags(ea)) )? continue if (
GetMnem(ea) "mov" GetOpnd(ea, 0) "ebp"
)? Message("a found mov ebp!\n", ea)
14
What if these offsets appear and vanish
dynamically?

• Well, then you have to create a plugin. It would
• Recognize the desired pattern
• Modify the database (create an offset, code, add
  cmt, etc)?
• Such plugins are fully automatic
• They hook to analysis events (frequently to
  custom_emu)?
• This is the most powerful technique but, alas, it
  requires DLL programming in C and using the SDK
• Just three wishes for your plugins
• Maybe a switch to turn your plugin off is a good
  idea
• Try to be user-friendly (for example, check if
  there is a comment before calling set_cmt
  otherwise you may overwrite a user-defined
  comment)?
• Do not exit to OS in the case of errors

15
Constant calculations some ideas

• Create a script or plugin to
• Add calculation results as comments (what about a
  script that traces the application and adds
  register values as comments for each
  instruction?)?
• Modify the database and simplify instructions

16
Camouflage

• Opaque predicates
• Proprietary virtual machine
• Encryption/compression
• Message-driven systems
• No direct references PIC (position independent
  code) code
• Hidden execution flow using SEH
• Rootkit techniques
• Hidden entry point (TLS callbacks, entry point in
  the resources section or in the header)?

17
Opaque predicates

• The definition says that opaque predicate is a
  predicate (an expression that evaluates to
  either "true" or "false") for which the outcome
  is known by the programmer a priori, but which,
  for a variety of reasons, still needs to be
  evaluated at run time
• In fact, some expressions evaluate to any integer
  value

GetLastError returns 0x57 (Invalid Parameter)?
18
Opaque predicates

• They may come in many varieties. Since we can not
  determine the outcome statically, we have to find
  it out ourselves and
• Inform IDA about the predicate outcome
• Prune dead code paths and simplify the code
• Working on graph view or pseudocode is easier
• Automate this? How?
• Future versions of IDA/Hex-Rays will offer some
  solutions
• Interactivity and extendibility helps

19
Proprietary virtual machine

• Many implementations use this obfuscation method
• Requires reverse engineering the virtual machine
• Examples
• Themida Code Virtualizer (http//www.oreans.com/
  )?
• Various malware
• In general case, building a processor module for
  the VM is required
• Let me show you a simple case

20
Bagle malware case

• This mass mailer contains the following code
  sequence

21
Bagle - opcodes

• Opcode handlers are very simple, I renamed them

22
Bagle opcode table

• After renaming all handlers the opcode table was

23
Bagle create opcode enumeration

• The following script created a enumeration for
  all VM opcodes based on the handler names

24
Bagle enumeration ready

• We can use this enumeration in the disassembly
  now
• Just declare an array of bytes and convert them
  to VM_CODES
• All this without quitting IDA (in fact, I was in
  the middle of a debugging session since there was
  another layer of protection before the VM)?

25
Bagle virtual machine readable

• Create an array of bytes, declare them as
  VM_CODES

26
Bagle VM logic visible

• The logic of the VM program became visible but
  there were immediate constants in the code that
  required manual intervention

27
Bagle VM decoding automated

• The following script solve the problem

28
Bagle comfortable analysis of VM

• After assigning a hotkey to the previous script,
  it was almost the same as having a processor
  module for the VM
• However, another level of deobfuscation is
  required(0x63FE34B2 0x9C01CB4D 0xFFFFFFFF)?

29
VM - summary

• We have to
• Analyze VM opcodes
• Give them meaningful, descriptive names
• In simple cases, simple enumeration will do the
  job
• In complex cases, a processor module has to be
  developed
• It is not _that_ difficult after all )?
• Rolf Rolles created a processor module for a
  VMhttp//www.openrce.org/articles/full_view/28

30
Executable packing

• Plethora of packing methods, good and bad
• Manual unpacking is always possible automatic
  unpacking would be ideal
• There are sample scripts and plugins in IDA
• uunp proof of concept unpacker plugin, exists
  as an IDC script as well
• unpack another sample unpacker
• IDA stayed away from this arms race
• There are many other solutions available
  (unpackers, process dumpers, etc)?

31
Executable packing - approaches

• Static analysis
• too time consuming
• requires tedious manual work
• Dynamic analysis (debugger)?
• much faster
• requires special sandboxed environment
• vulnerable to anti-debugger tricks
• Code emulation
• a good idea
• any widespread emulator will be attacked
• emulation imperfections are a problem
• No ideal solution...

32
Encryption

• Methods vary from simple XOR encryption to
  serious encryption schemes like AES, Blowfish,
  etc
• Since the key must be present to run the
  executable, the strength of the encryption method
  does not matter
• Ideally we just let the application decrypt
  itself and then take a memory snapshot
• If only part of the executable is decrypted at a
  time, then we need to automate the process of
  taking memory snapshots

33
Position independent code

• No fixed addresses means no xrefs
• Analysis is harder but user-defined offsets can
  help

34
Anti-debugging tricks

• I'm sure you know better since you are the
  practitioners )?
• IDA related
• Its default settings are not good for hostile
  code debugging
• Exceptions are handled by the debugger change
  it in the debugger settings
• Just two simple methods

35
Use tracing to find anti-debugging tricks

• Tracing is slow but it may be used to find
  why/when/how the process misbehaves
• Sample trace log from a naïve code

36
Simple method to neutralize found tricks

• Use conditional breakpoint to neutralize tricks
  encountered while single-stepping
• The breakpoint condition for the call instruction
  is ipip2
• Breakpoint conditions may call all defined IDC
  functions (including user-defined ones) can be
  used for logging and changing the application
  behavior

37
Debugger current state

• IDA debugger advantages
• The annotated database is available during
  debugging
• All facilities continue to work FLIRT
  signatures, function prototypes and argument
  names, structures, enumerations, your scripts and
  plugins, etc...
• Scriptable
• Available on multiple platforms (remote
  debugging)?
• Shortcomings
• Slow operation
• Multithreaded applications poorly handled
• Only application level debugging is available
• We continue to work on the shortcomings
• Future versions will be more fit for hostile code
  analysis

38
Debugger - ideas

• A debugger plugin to configure the 'stealth' mode
• Exceptions are passed to the application
• Calls to IsDebuggerPresent, NtSetInformationThread
  and similar functions are intercepted
• Emulating debugger module
• A 'stealth' debugger module
• Do not use the standard debugger interface
  (CreateProcess/WaitForDebugEvent)?
• Inject a debugger DLL into the process and
  communicate with it (the must-have functionality
  is breakpoint handling and memory access)?
• Higher level debugging
• Skip hidden code areas, group nodes in the graph
  view
• Source level debugging using the pseudocode view

39
Summary

• Obfuscation methods vary, no single receipt for
  all cases
• The key is to be able to represent the code
  nicely on the screen
• The problem is generic what to do if IDA
  displays things not the way I want?
• The answer is modify the output!
• Use interactive commands, menus, etc
• Represent data in meaningful way
• Hide irrelevant information
• Patch the database and simplify it
• Create scripts, plugins, processor modules to
  avoid routine work

40
The obfuscating call instruction

• The function returns a few bytes further that it
  would normally

41
Example solution to obfuscating call

• The idea intercept emulation of calls to
  ex_obfuscating and create correct xrefs
• Just a few lines of code (unfortunately, a
  plugin)?
• Can be made more complex if necessary
• The source code of the sample plugin can be found
  at http//www.hexblog.com/ida_pro/files/ex_deobfus
  cate.zip
• See the next slide for the essential part of the
  plugin

42
Plugin to handle weird call instructions
43
Deobfuscated code

• Note the arrow on the left side of the listing
• Graph could be simplified further by a plugin

44
The thank you slide

• Thank you for your attention!Questions?