Parameters to Consider While Buying Laser Engraving Machines

1
Parameters to Consider While Buying Laser
Engraving Machines
sales_at_altparts.com
If you own a laser cutting business, you must
have known that setting up and using the
machines is not easy.
www.altparts.com
2
sales_at_altparts.com
Even if they work smoothly, you need to
investigate the wear and tear as well as the
maintenance of these machines. Also, there are a
lot of factors that you need to consider before
buying them. Go through these tips and you will
be able to take better decisions Take your own
time to research
www.altparts.com
3
sales_at_altparts.com
When I say research, I do not just mean that you
need to start searching on machines and
suppliers. You should also be aware of your
business and its requirements. After all, laser
machines are a huge investment and there are a
lot of machine types available in the
market. All the machines have different laser
spare parts, sizes, and functionalities. Hence,
you must know the utility or tasks you want to
put it through. Just so that you know, bigger
machines enable you to cut through bigger
materials and so on. It is also advisable to
conduct your research on distributors and
suppliers and find out about the companies that
have a good review.
www.altparts.com
4
sales_at_altparts.com
You can also enquire with them about Mazak laser
parts, Amada and Bystronic Laser Parts etc. so
that you can know how much you will have to
spend on spare parts after buying the
machine. Consider the Environment You need to
consider both internal and external
environmental factors before buying these
machines. Factors like humidity play a huge role
in deciding the air system and compressor of the
machine. So, find out about the humidity levels
in your region. Also, ensure that you have
enough power supply spots as well as plugs so
that you can install other equipment along with
the laser machine. It can include anything right
from a computer to a drainage system. The room
that you install the machinery must be dust free
and have good airconditioning as it is likely
for it to generate heat.
www.altparts.com
5
sales_at_altparts.com
As most laser machines generate the power through
an electric laser tube, you need to release it
of electric tension. And for that, you would
need an earth cable that prevents it from
breaking. Monitor the Air Flow and Suction If
the air flow and suction support is insufficient,
your materials might catch fire and accidents
might happen. However, laser machines come with
the air suction that lead the fire to set off on
its own. Ask your laser distributors technician
to install an air suction system. This system
makes sure that it removes the oxygen and smoke
when you work with the laser. You should also
install the exhaust at a suitable place so that
the surroundings do not get polluted. Also check
if the suction pipes have a good sealing as open
spaces make the air suction process weak.
www.altparts.com
6
sales_at_altparts.com
Honeycomb for Small Objects If you are cutting
large metal sheets, the cutting area should be
okay. However, if you are going to indulge into
cutting small objects (smaller than size A3), you
might need a Honeycomb. This is because, if you
do not have a honeycomb, the objects might fall
after you cut them. If this keeps happening, it
can create a lot of damage to your machine. A
honeycomb might cause you some money but it is
worth buying. Check out with the laser
distributors offering Mazak laser consumables as
to whether they sell Honeycomb or not. There
are several other pointers you need to remember
apart from the ones given above. We will come up
with some more shortly. Keep reading this space
for more.
www.altparts.com