FRP Cooling Tower Manufacturer in Delhi

1
KoolDrop
FRP Cooling Tower Manufacturer
www.kooldrop.com
2
Types Of Cooling Towers
01
FRP Cooling Towers Bottle Type
02
FRP Cooling Towers Square Type
http//www.kooldrop.com
3
Click on
http//www.kooldrop.com
http//www.kooldrop.com/frp-round.html
4
FRP Cooling Towers Bottle Type
Kool Drop manufactures frp round bottle shape
cooling towers based on induced draft counter
flow design using rotary water distribution
system using aluminium/ ss / gun metal sprinkler.
Bottle type Cooling tower design to withstand
high wind velocity. Sudden shocks and vibration
can absorb air from all direction. Airtech makes
absolutely leak proof with honey well PVC
fill-increases surface are, splits incoming air
and water into several streams spreading equally
across the tower cross-section.
http//www.kooldrop.com
5
Fillings

• The fillings are made of PVC. They have excellent
  heat exchange efficiency and remarkably good
  chemical resistance. These fills are totally
  enclosed in the tower, thus excluding them from
  sunlight and minimizing the growth of algae .
• TECHNICAL DATA OF PVC FILLS
• 1 Standard Type of PVC Fills 600 mm X 300
  mm X 150 mm
• 2 PVC Honey Combs 25 mm (12.5 12.5)
• 3 Corrugation Pitch 2.8 mm
• 4 Corrugation Depth 3 mm
• 5 Spiral Angus 21
• 6 No. of PVC sheets per 150 mm width 12
• 7 Heat Transfer area / Cu Ft fill vol. 1 Cu
  Ft.
• 8 Thickness of finished fill 0.25 mm

http//www.kooldrop.com
6
Click on
http//www.kooldrop.com
http//www.kooldrop.com/frp-square.html
7
http//www.kooldrop.com

• FRP Square Shape Cooling Towers

Kool Drop manufactures frp rectangular / square
shape cooling towers based on induced draft
counter flow and forced draft counter flow design
using stationery type water distribution system
which is designed to distribute hot water
uniformly over fill area.
We offer a wide range of FRP Cooling Towers that
is made from quality tested raw materials. The
Square Shape FRP Cooling Towers are designed
especially for an alternative to round model for
selection to our buyers. It is also equipped with
a Hot dipped Galvanized hardware with rectangular
casing body.
8
http//www.kooldrop.com
Fillings
The fillings are made of PVC. They have excellent
heat exchange efficiency and remarkably good
chemical resistance. These fills are totally
enclosed in the tower, thus excluding them from
sunlight and minimizing the growth of algae . A
pre-eminent quality and long life fill consists
of modular block of PVC honey combs construction
to create prolonged contact time of hot air with
water for maximum heat transfer. TECHNICAL DATA
OF PVC FILLS 1 Standard Type of PVC Fills
600 mm X 300 mm X 150 mm 2 PVC Honey Combs
25 mm (12.5 12.5) 3 Corrugation Pitch
2.8 mm 4 Corrugation Depth
3 mm 5 Spiral Angus
21 6 No. of PVC sheets per 150 mm width
12 7 Heat Transfer area / Cu Ft fill vol. 1 Cu
Ft. 8 Thickness of finished fill
0.25 mm
9
www.kooldrop.com
10
http//www.kooldrop.com
An aerodynamically designed axial flow type fan
is specifically designed for cooling tower use. A
well balanced fan delivers large air volume at
high efficiency and low noise level. The fan
blades and hub are of cast aluminium alloy (LM-6).
11
Thankyou
For any Information and buy FRP Cooling Tower
Manufacturer Visit on
www.kooldrop.com
12
Kool Drop Cooling Towers Pvt Ltd
www.kooldrop.com
Facebookhttps//goo.gl/QcRm1K
Twitterhttps//goo.gl/1eZwHx Linkedin
https//goo.gl/sWcsMT Googlehttps//goo
.gl/Hiaqwe
About Kooldrop https//goo.gl/RdrP4n Wooden
Kooling Tower https//goo.gl/hNkMGv FRB Round
Shape Coolong Tower https//goo.gl/U4QWG9