How to replace your iPhone 7 Plus screen

1
How to replace your iPhone 7 Plus screen
2
If you've wound up with a shattered iPhone 7
digitizer here's what you need to know about
repairing it.
3
The iPhone 7 Plus LCD screen and digitizer is
beautiful, to be sure but that glass beauty can
break if dropped, smashed, or otherwise chipped
against similarly-hard surfaces. Some breaks are
worse than others, but if you completely smash
your screen, you're probably in need of a screen
repair.
4
Visit www.partfect.co.uk
5

• After all, modern iPhone screens aren't just
  LCD and glass They pack several different
  components in one. The digitizer reads your
  finger contact and movement the LCD displays all
  the images, video, and other visual information,
  and the glass screen helps shield the inner
  components of the phone. When you crack your
  screen, it also destroys many other things in
  your iPhone such as water resistance, digitizer
  iPhone.

6
There are several ways to repair or replace a
broken iPhone screen, depending on your monetary
situation and free time. Here are a couple, in
order of easiest (and cheapest) to most
complicated.
7
If your screen is shattered but relatively
intact, you can put off a potentially-costly
repair by sealing the broken pieces behind a
screen protector. I'll note that this is a
temporary measure, and one I generally recommend
for screens that are cracked, but not completely
destroyed it can keep the cracks from worsening
or pieces of the screen from falling apart, but
eventually, you'll need to replace the screen.
8
General repair guidelines

• Always use good lighting - smart device
  components are small and you'll need plenty of
  light to see what you are doing.
• Maintain a clean, organized workspace so you
  don't lose or confuse any components.
• Group your screws so you can keep track of where
  they came from. Most screws cannot be
  interchanged.
• At any point during a repair, if the adhesive
  becomes hard to separate, apply more heat.
• After separating adhesive, keep the housing and
  screen in close proximity until flex cable is
  disconnected.

9
How to replace a broken iPhone 7 Plus LCD Screen
and digitizer

• The iPhone 7 Plus LCD screen assembly is
  difficult to remove and replace Several flex
  cables can be torn easily, so proceed carefully.
  In addition, loosening the screen's adhesive
  requires controlled heating with a dehydrator or
  heat gun.
• Required tools and parts
• Not only will need a new screen an "LCD
  Assembly", if you want to be technical about the
  part you're going to need some tools if you're
  going to do this right. Or at all.

10
Contact Us

• Address Unit 23A, Halliwell Business Park,
  Rossini St.
• Bolton, United Kingdom, BL18DL
• Contact No 44-1204-77-3456
• Website https//partfect.co.uk/