Know The Steps to Make Bead Pendants

1
6 Steps to Make Bead Pendants
2
1. Use Thin Head Pins and Select Your Beads
It is recommended to use head pins that are
skinny (narrow in width) that has at least 1 1/4
inches (3.2 cm) of length above the bead to make
the wrapped wire loop sleekly. Its your choice
if you want to use plain or ornamental head pins.
Same you can do while selecting the type of
beads. Matte or glass beads, silver/gold plated
Roundels or may be certain Gemstones that vary
in physical properties as well. Cool jewelry
beads for sale show can only pull off well if you
know how to cut clutter. Just be sure that
whatever choices youll make in the beginning,
they are going to be crucial in putting the
pendant together.
3
2 - Slide the Beads One by One onto the Head Pin
Once youve carefully selected your beads and
pins. Start sliding beads slowly onto the head
pins and string the bead onto the head pin so
that the bottom of the bead gets fixed against
the head of the head pin. If your bead hole is
smaller or larger than the head of the head pin,
you will have to skip this step and laid back
again onto the first one.
4
3 - Take Hold of Round Chain Nose Pliers
Chain nose pliers referred to as flat-nosed
pliers is a quality tool that you should buy ASAP
as its applications are enormous in making beads
pendants in bulk for a kick off starting a
jewelry business. You can shop for beads from a
dollar store online. These chain nose pliers are
useful in many pendants wire wrapping. Grasp
the head pin by the nose of the tool and ready
for a surprise. Grasp directly above the bead and
with your fingers bend the top of the head pin at
90-degree angle. You can get your hands on it
from available jewelry making supplies and tools
online and buy them cheap. Its easy to work with
them especially when processing a thin bead wire
pendant.
5
4 - Reposition Nose Pliers for making A Wire Loop
text here
Reposition the pliers and place it above the bend
of the head pin. In this way, the bottom jaws of
the pliers should grasp the top of the wire loop
between the jaws. Grasp the loop between the jaws
of the nose pliers. Grasp the wire end with the
chain nose pliers. You can bend multiple wires
at a single time, but we would suggest you go
easy on every move you make. This is your first
time making a bead pendant, and we dont want a
mishap.
6
5 - Wrap the Wire Ends Two to Three Times
After you have finished making a wire loop,
Youre close to the end. Hold firmly on both
pliers. Bring the wire's end within the chain
nose around the standing wire and begin wrapping
the wire end and make it a goof two-to-three
times wraps with force. This way you are close to
making nice bead pendants.
7
6- Slide Your Pendant Onto The Chain
Congratulations on making your first perfect bead
pendant! Its time to give the pendant a slippery
slide onto the chain (any stringing material
youd like to glide your pendant in). You can try
various stringing materials with your pendant to
see which one is suitable. In the future, you can
remove it when you get turned off from the design
and create a new one to uphold versatility at
jewelry making.
8
Thank
You
To know more visit https//dollar-king.net/arts-a
nd-crafts/beading-jewelry-and-supplies.html