Title: How to Make Soap
1How to Make Soap
2Supplies
- Soap mold
- Soap base in paper cup
- Scent
- Dyes
- Inserts (cookie cutters)
- Bottle of rubbing alcohol
- Stirring stick
- Paper towel or napkin
- Sparkles and/or mica if needed
3Step One - Preparation
- To prepare to make soap, make sure you have your
inserts ready to go. - For soap inserts, cut them out with cookie
cutters in advance, before you even start making
your soap. - Have you scents, dyes, sparkles, etc already
chosen. - If you are going to do a solid back, you will
want to have that cut in advance as well.
4Step Two Melt Soap
- Melt your soap for 30 seconds in the microwave.
- If there are any unmelted pieces, stir the soap
until the hotter soap melts it.
5Step Three Stir-ins
- Now that your soap is hot, stir in all liquid
ingredients such as SCENT, DYE, and if needed,
SPARKLES and MICA before pouring.
6Step Four Pour Soap
- After you have thoroughly stirred your soap with
its new ingredients, you are ready to pour it
into your mold. - You may want to spray the back with alcohol to
get the bubbles out.
7Step Five - Inserts
- There are many types of inserts, which you will
learn about later. For ALL inserts, make sure you
spray them with alcohol before you place them in
the soap.
- Remember that you are placing them face downthe
bottom of the soap is going to be the front.
- Use your stir stick to place them exactly where
you want them. You only have so much time to do
this before the soap will harden. Spray the back
with alcohol.
8Step Six Waiting!
- After you are finished with your soap, you need
to place it in the freezer so it can harden
faster and is easier to pop from the mold. - Carry it CAREFULLY to the freezer and leave it
there. Mrs. Rees will take care of it after that.
Youll see it the next day in class!
9Step Seven Solid Back
- IF you are doing a solid back, follow these
directions - 1. Take your soap from the freezer and ensure
that it is sufficiently solid.
2. Only AFTER your soap is solid, melt the back
of your soap for only TEN SECONDS in the
microwave.
You should be able to touch the back without a
dent being made. The more solid the
betterotherwise the back layer will break
through the front and obscure your soap.
10Step Seven Solid Back
3. Stir the soap until its all melted. Then
SPRAY the back of you soapif you dont, the two
layers will easily break apart after they are
solid.
4. Pour the soap onto the back of your soap until
it is even. Then spray the back and put it back
in the freezer.
11THE END