Propsoal Comaprison Summary - PowerPoint PPT Presentation

About This Presentation
Title:

Propsoal Comaprison Summary

Description:

'Solutions for the PC card, compact flash, memory stick, and SD memory will be available in 2005' ... Compact Flash. Memory Stick. SD Memory. DS-UWB. MB-OFDM ... – PowerPoint PPT presentation

Number of Views:39
Avg rating:3.0/5.0
Slides: 24
Provided by: mattwe
Learn more at: https://grouper.ieee.org
Category:

less

Transcript and Presenter's Notes

Title: Propsoal Comaprison Summary


1
Project IEEE P802.15 Working Group for Wireless
Personal Area Networks (WPANs) Submission Title
Proposal Comparison Summary Date Submitted
May 12, 2004 Source Matt Welborn Company
Freescale Semiconductor Address 8133 Leesburg
Pike Vienna, VA USA Voice703-269-3000,
E-Mailmwelborn_at_xtremespectrum.com Re
Abstract Summarize the two PHY proposals with
respect to the requirements described in the TG3a
Selection criteria document. Purpose Provide
technical information to the TG3a voters
regarding PHY proposals. Notice This document
has been prepared to assist the IEEE P802.15. It
is offered as a basis for discussion and is not
binding on the contributing individual(s) or
organization(s). The material in this document is
subject to change in form and content after
further study. The contributor(s) reserve(s) the
right to add, amend or withdraw material
contained herein. Release The contributor
acknowledges and accepts that this contribution
becomes the property of IEEE and may be made
publicly available by P802.15.
2
Introduction
  • Goal Summarize the two proposals with respect to
    the requirements described in the TG3a Selection
    criteria document
  • Approach Collect reported results from the
    various proposal documents and requirements from
    selection criteria.
  • Disclaimer The author of this document is also
    one of the authors of the DS-UWB (Merger 2)
    proposal. Opinions/comments are so labeled

3
Source Documents
  • Merger 1
  • 03/268r3
  • 04/220
  • Merger 2
  • 04/137r2
  • 04/099r2
  • 04/140r4
  • Selection Criteria
  • 03/031r11

4
3.1 Unit Manufacturing Cost
5
3.2.2 Interference Susceptibility
6
3.2.2.6-7 Generic In-band Interference
7
3.2.3 Coexistence
8
3.3.1 Manufacturability
9
3.2.2 Time to Market
10
3.3.3 Regulatory Impact
11
3.4 Scalability
12
3.5 Location Awareness
13
4.1 Alternate PHY Required MAC Enhancements and
Modifications
14
5.1 Size and Form Factor
15
5.2 PHY-SAP Payload bit-rate and Data Throughput
16
5.3 Simultaneously Operating Piconets
17
5.4 Signal Acquisition
18
5.5 System Performance
19
5.6 Link Budget
20
5.7 Sensitivity
21
5.8 Power Management Modes
22
5.9 PHY Power Consumption
23
5.10 Antenna Practicality
Write a Comment
User Comments (0)
About PowerShow.com