Manufacturer of Heat Exchanger Air Receivers Pressure vessel Air Dryer Abacus engg

1
Abacus Engineering http//abacusengg.com

• Manufacturer of Heat Exchanger Air Receivers
  Pressure vessel Air Dryer By Abacus Engineering

2
About US http//abacusengg.com

• Abacus is the leader in design and manufacture of
  Heat Transfer Equipments and Industrial Chilling
  Equipments. We have the services for Thermal
  Designing, Mechanical Designing, Fabrication,
  Drawings, Site Installation Designing facilities
  We have fully equipped Design Department capable
  of doing thermal and mechanical designs of all
  offered equipment in house and thereafter
  generating fabrication drawings of the same. The
  designing is done as per various design codes
  viz. IS,ASME,TEMA,API,ASHRAE, BS etc. We have
  extensive computer hardware and software to
  facilitate our designing as well as other areas
  of concern within the organization. Strength In
  house Detailed Engineering for all manufactured
  items, i.e. Process(Thermal) Design, Mechanical
  Design and Fabrication Drawings, fully utilizing
  the modern tools of Computer Aided Designing is
  where the real strength of Abacus lies.

3
PRODUCTS

• Tube Heat Exchangers
• Air Cooled Heat Exchanger
• Inter / After / Oil Coolers
• U' Straight Tube Bundles
• Pressure Vessels
• Columns
• Reactors
• Process Condensers
• Chemical Storage Vessels
• Clarifiers / Economizers
• Air Receivers
• Hot Water Generators
• De-Super Heaters / Pre Heaters
• Water Cooled Chillers

• Air / Gas Chilling Units
• Brine / Glycol Chillers
• Air Dryers
• Air Conditioning Equipments
• Water / Air Cooled Condensers
• DX / Flooded Chillers
• Refrigeration Equipments
• Heating Units / Equipments
• Air Cooling Ventilation Systems
• Oil Chilling Unit
• Co2 Liquefiers
• Walk-In Cold Rooms up to (-)40oC
• Air Cooled Chillers

4
Material http//abacusengg.com

• Major raw material is in the form of plates,
  pipes and tubes. Carbon Steels used is confirming
  to is, ASME etc. viz. SA 515 / 516Gr 60 / 70, SA
  105, SA 266 GR 2, IS 2002-2, IS 2062 GR A, SA
  210,SA 179, SA 106-B, SA 333 GR 6 etc. shell
  thickness up to 50 MM, tubes sheets up to 150 MM
  and tubes up to 2.5" OD. Stainless steels used is
  confirming to SA 240, SA 213, SA 312, SA182
  Grades 304, 304L, 316, 316L, 316TI, 321, 347,
  duplex SA 2205etc. shell thickness up to 40 MM,
  tubes sheets up to 150 MM and tubes up to 2.5"
  OD. Lots of other non ferrous materials also form
  part of regular production such as, Copper,
  Brass, Naval Brass, Admiralty Brass, Phosphorous
  Bronze, Al. Bronze, Cupronickel, Titanium, Monel,
  Inconel, Has alloy etc. in all grades shell
  thickness up to 40 mm, tubes sheets up to 150 mm
  and tubes up to 2.5" OD.

5
After Market Services of Abacus Engg

• Brine / Glycol Chillers a) Site inspections and
  Evaluations. b) Replacement of Adsorbents
  (Alumina and Silica Gel) c) Retrofits, retubing,
  revamping and upgrades. d ) Replacement parts
  and instrumentations. e ) Replacement tube
  bundle coolers.

6
Our contact REGD. OFFICE

• D-15/4, Okhla Indl. Area, Phase - II, New Delhi
  - 110020 (India)Telephone ( 91 - 11 ) - 98100
  07843Fax ( 91 - 11 ) - 26384115 , E-mail
  mail_at_abacusengg.comWeb Address
  www.abacusengg.com