Easy way to reset cisco router password without losing your configuration

1
Easy way to reset cisco router password
2
(No Transcript)
3
Why you need to reset password

• "I forget my cisco router password. Can someone
  give me a suggest to reset cisco router
  password.Did you know you can change them without
  losing your configuration?"--From yahoo answer.
• Along with a Cisco router, you decline need an
  Ethernet wire or system wire before reset
  password.
• You first need to hook up the Cisco router with a
  system or an Ethernet wire. In case of system
  wire, hook up it to the system slot of your
  notebook or computer. You then have to web link
  it to the system slot on the Cisco router that
  flows Console, (Cisco 2600 Sequence Electrical
  circuitry and Setup) in red composing.
• Note As another popular use rouerter ,
  CISCO2911/K9 has attacted lots of attention to
  help users solve their network problem.

4
(No Transcript)
5
Steps to reset cisco password

• Moving to phase second, you are required to use
  the system slot to accessibility the CISCO router
  via the Super Terminal system. This system comes
  preinstalled with the Windows based pc. From the
  Begin selection, choose All Programs
  ---Accessories--- Communications and simply
  select the quick way to Super Terminal.
• The following slot configurations need to be used
  when encouraged by Super Terminal
• BITS per second 9600
• Data bits 8
• Parity None
• Stop bits 1
• Circulation control None
• As a substitute, you can open a control immediate
  screen by choosing from the Begin selection. Type
  cmd in the space offered and media Enter. In
  the control immediate, get into the control
  telnet followed by the IP deal with of the
  router. An example of the control range is C
  telnet 123.156.204.12.
• Command usage
• -Prior to any changes, get into the blessed
  function of the router and use the following
  control. You also need to make sure that the
  Routergt is the standard router immediate for a
  CISCO router.

6

• -Once you get into the allow control, it will
  change your CISCO router immediate to
• Router
• In order to get into the configurations function
  of the CISCO router, the following control needs
  to be used
• Routerconfig
• Once you efficiently get into the configurations
  function, the following concept will be received
  
• Enter configurations orders, one per range. End
  with CNTL/Z.
• After you get into the configurations function of
  the CISCO router, the following immediate will be
  visible
• Router (config)
• Password Setting

7

• For example, for Newpswd4 as the code, the
  control will be
• Router(config)enable key Newpswd4
• While creating code configurations, it is
  recommended that you use a different protection
  account details for enable secret and enable
  password. The allowed key code is more protected
  and secured than the allow code. One can also not
  view the allowed key code in the CISCO router
  configurations.