Direct TV Installation Tools You Can Get In Perth

1
Direct TV Installation Tools You Can Get In Perth
2
Cable Strippers
Coax Cable

• Coax cable is used to transmit signals from the
  DirecTV satellite dish to receivers. Coax cable
  comes in many lengths. DirecTV installers have
  large spools of coax cable that extend for many
  feet. Cable needs to be prepped before being
  attached to the DirecTV dish and receiver.

Cables need to be stripped of their outer jacket
so connectors can be fastened correctly. Cable
strippers properly strip away the outer jacket
using a blade so only the bare wire is exposed.
Cable strippers are easy to use and can be found
in most hardware and electronic stores.
3
Signal Amplifier
Crimpers

• Connectors at the end of cables sometimes become
  loose and need to be refastened. Loose connectors
  could cause a poor signal because the cable wont
  be fastened correctly. Crimpers are used to
  fasten a connector to the end of cables by
  clamping them. Crimpers can be found in most
  hardware or electronic stores and are easy to
  use. Clamping the connector to the cable wont
  require a lot of force, making it easy for most
  people.

Your cable might need a boost in power between
the satellite dish and your receiver. Signal
amplifiers provide a signal boost to help with
signal losses. Amplifiers are easy to install.
Cables need to be cut and prepped with each end
screwing into the amplifier.
4
MultiSwitches

• Adding receivers will require more cable to be
  run from the DirecTV dish to the new receivers.
  MultiSwitches provide multiple outlets to add
  receivers to a single satellite dish. Some
  multiswitches are universal to all satellite
  dishes, while others will only work with DirecTV
  dishes. MultiSwitches come in different sizes,
  allowing a few or many extra inputs.

Source http//www.ehow.com/list_6730935_direct-t
v-installation-tools.html Images
http//www.audiovisualinstallperth.com.au/tv-anten
na-installation