Need to pay attention to the use winch

1
Need to pay attention to the use winch
2
Section of wire rope structure and antiseptic
methods

• Point-contact round stock, round stock line
  contact, surface contact round stock, profiled
  stocks, single stock does not rotate, such as
  seals and flat. Where surface contact is by
  traction round strand wire rope stranding machine
  will line contact strand wire drawing die or
  roller die by pulling the system. Through die
  before deformation and after deformation
  sectional strand.
•  
• Oiled antiseptic methods
• All wire rope must be oiled. Fiber core immersion
  oil, grease required to protect the fiber core
  does not rot, does not rust steel, double girder
  overhead hoist crane moist fibers, and lubricate
  the rope from the inside. Greased surface so that
  all the surface of the wire strands are evenly
  coated with anti-rust lubricant, in which the
  friction and enhance a large mine mineral water
  with a rope, to increased wear and water
  resistance coating strong Heiyou fat alternative
  use is Strong film-coated, rust good performance
  marked fats and require oil thin, easy to keep
  clean during operation.
• Anticorrosive coating method
• Galvanized coating, aluminum, coated nylon or
  plastic. Thick coating of galvanized steel and
  plated after first pulling a thin coating and
  galvanized steel wire after pulling thick coating
  mechanical properties than smooth rope has
  decreased, should be used in severe corrosive
  environments. Aluminum wire rope is more
  resistant to corrosion, double trolley overhead
  crane abrasion, heat-resistant than galvanized
  steel wire rope is mainly used for fishing trawl
  vessels and mines containing H2S, etc., using the
  pull after plating production. Coated nylon or
  plastic coated wire rope of the two co-rope after
  rope and coated stocks. The former is used for
  static rope, which is used for moving cable.

3
Precautions when using winch

• 1 , wire rope reel should be neat , overhead
  crane grab if found around overlapping and
  oblique , should be shut down rearranged.
  Prohibited in the rotation by hand , stepped foot
  pull rope . Rope allowed to completely release ,
  should be retained at least three times .
• 2 , allowed knotted rope , twisted , broken in a
  pitch more than 10 , should be replaced.
• 3 , operation, no person shall cross the rope ,
  after the object ( the object ) to enhance the
  operator shall not leave the winch. Object or
  cage should be lowered to the ground at rest .
• 4 , operations , drivers, signalers to maintain
  good visibility with lifting objects , drivers
  and signalers should cooperate closely obey
  signals unified command .
• 5 , the job situation in case of a power outage ,
  you should cut off the power , will enhance the
  material down to the ground.
• 6 , work to obey the command staff of the signal
  , gantry crane the signal is unknown or likely to
  cause an accident should suspend operations until
  after clarifying the situation in order to
  continue operations.
• 7 , operations sudden power outage , you should
  immediately pull the knife , will ship things
  down.
• 8 , the operation is completed , you should feed
  tray floor , lock electrical box .
• 9 , in the course of rope and mechanical wear.
  Pyrophoric local corrosion damage is inevitable ,
  should be brushing time interval to protect the
  oil .
• 10 Do not overload use . That is more than the
  maximum number of hosts tons.
• 11 , the course should be careful not to appear
  to tie. Squashed. Arc wounded . Erosion of
  chemical media .
• 12 , may not be directly lifting hot objects ,
  electric chain hoist objects to the angular care
  board.
• 13 , using the process should always check the
  rope used to achieve the standards should be
  scrapped immediately scrapped .