Dustless Blasting

1
(No Transcript)
2
Considered one of the most cost effective surface
preparation tools on the market, the Dustless
Blaster removes virtually any type of surface
coating quickly. As an added bonus, it does this
without creating heat, a cloud of dust, or
emitting harmful byproducts. Equally important,
the preparation and work space required is
minimal.
3
A Dustless Blaster is a machine that uses water,
rust inhibitor, recycled glass, and a compressor.
The blaster works as a substitute for hand tools
such as grinders and sanders and is available in
a range of sizes to meet the needs of any
project, from low volume to commercial to
industrial.
4
The Dustless Blaster works by mixing water and
abrasive inside the blast tank. The water is used
to increase the energy output of the machine. To
understand the effectiveness of this better,
consider the difference of surface impact when
blowing dust versus throwing a handful of wet
sand. The wet sand hits the target harder because
it doesnt disintegrate into dust as dry sand
does.
5
Dustless blasting is drastically faster than
sandblasting and sodablasting. Sandblasting has
the potential to destroy original material and
can warp a surface whereas the water from a
Dustless Blaster reduces friction and prevents
heat to eliminate warping. There are also no
paint adhesion problems, which can result from
sodablasting. Environmentally speaking,
sodablasting kills grass and plants surrounding
your work space. Dustless blasting is faster,
cleaner and safer for the environment than any
other paint stripping technology available.
6
In addition to the advantages already mentioned,
the Dustless Blaster boasts lower abrasive
consumption and can use almost any abrasive that
sinks in water. It is safe for workers because it
uses recycled bottle glass which contains no free
silica. It also doesnt affect nearby personnel.
And because its possible to blast with people
nearby, productivity doesnt suffer. It even
needs less working space, making containment
largely unnecessary. Finally, the rust inhibitor,
when used properly, ensures chloride removal for
surfaces ready for paint.
7

• Building restoration for containment, lead and
  asbestos paint abatement, and removing toxic
  coatings
• Graffiti removal to recoup aesthetic value of an
  establishment
• Automotive stripping
• Concrete or masonry restoration
• Thermoplastic road stripe removal
• Sealer removal
• Parking lot grease spot removal

8
As with any machine, it is recommended to follow
instructions when preparing your Dustless Blaster
for use and when handling the hose and release
valve. When spraying, test the appropriate
distance with which to hold the hose to maximize
the amount of stripping with each movement. As a
general rule, the blaster should be held at an
angle instead of blasting head on. For additional
reference, there are training videos and
resources online.
9
The residual stripped paint and recycled glass
tend to litter the surface being worked on,
whether on the ground, or beneath and around a
car after automotive stripping. The easiest way
to clean up is to prepare the site ahead of
blasting by setting a layer of plastic down.
After blasting, but before the final rust
inhibitor rinse down, roll up the plastic and
throw it away.
10
Big As Place LLC is your convenient provider for
all your blasting supply needs, including
helmets, hoses, gear, parts and accessories.
Order by phone or online for all of the latest
products on the market. sandblaster-parts.com (61
6) 741-9237
11
SUMMARY
With so many applications and clear advantages
over other tools on the market, the Dustless
Sandblaster has earned its reputation. The
sandblaster and sodablaster pale in comparison to
the performance, environmental impact, and
efficiency benefits of the Dustless Blaster.