Sprinkler System Troubleshooting

1
Sprinkler System Troubleshooting
A sprinkler system is one of the best ways for
watering your garden or lawn. This article
provides some troubleshooting tips for the same.
2
Garden sprinklers are generally connected to
hoses and have a good number of holes or tubes to
sprinkle water in all directions. They can also
be used for lawns. However, before starting off
with the troubleshooting tips, let us try to
understand what its basic components are. This
will help us in identifying the problem more
precisely.
Sprinkler SystemBesides the sprinkler, there are
three more important components. There is a
motor, timer circuit, and a valve. Now, the
problems associated with these systems have their
roots in one of these components.
Problem 1 Watering at Indefinite and Unwanted
Times Solution The problem lies with the timer
circuit. Multiple start times may have been set.
Check the program and set only one start time.
However, if you do not have proper expertise, it
is better that you contact a person who
understands the programming code, to check it.
Problem 2 No Watering at All Solution There
can be several reasons for this. First of all,
check if the sprinkler has been plugged into the
power supply. Next, check whether the timer is
switched on or not. If that is not the case then,
there is probably some issue with one of the
electronic components. Check the fuse. In case of
a blown-out fuse, replace the same. If you are
facing this problem of fuses getting blown
regularly, then you need to replace the valve
solenoid. Other components like faulty sensor
devices or transformers could also be the reason.
In either case, you need to replace them. Als,
check for faulty or damaged wires.
3
Problem 3 FloodingSolution If the garden
area is getting flooded, there are two possible
reasons Either the nozzle is not working or
missing, or the head is faulty. In either case,
replacement is the only solution. Problem 4
Uneven Watering Solution In this case, you are
definitely dealing with one of the rotor
problems. You must have noticed that, in such
cases the sprinkler cannot rotate a full 360.
Usually, there is some problem with the head or
the nozzle is not working. Another reason might
be that, the water pressure is not sufficient to
rotate the sprinkler. In such cases, you have to
either replace or simply split the entire zone
into two parts. Before you go for the
replacement, check if there is any debris stuck
in the equipment. If found, simply clean it with
a brush.
These were some of the common problems and the
possible solutions to them. There are a lot of
other problems that may arise, which have their
roots in the programming code of the timer. In
such cases, it would be best to seek technical
expertise.
Source http//www.buzzle.com/articles/sprinkler-s
ystem-troubleshooting.html
Images http//www.duralirrigation.com.au/Category
/Irrigation-Lawn-Sprinklers.html