How to install canon wireless printer - Risezone

1
How to Install
Wireless Printer
2
Step 1 Take away all the protective materials
orange color tape on the outer surface the
machine.
3
Step 2 Open the Paper Output Tray raise the
Scanning unit Cover.
4
Step 3 Remove protective material orange color
tape in the region of Ink Cartridge Holder. Shut
the Scanning unit cover.
5
Step 4 Place in the power cord into the power
interface on the left side of the printer
connect the next end to the wall of power outlet.
6
Step 5Push the ON button to turn on the
printer. Use Operation Panel to select the
language and then press the OK button.
7
Step 6 Push ON button to turn off printer. Open
Scanning part Cover. Insert Ink Cartridge Holder
into the Holder. Shut the Scanning unit Cover.
8
Step 7 Press ON button to turn on printer. Wait
a while for printer to adjust the Ink Cartridge.
9
Step 8 Press the Setup button. Use Operation
Panel select Wireless LAN setup, then press OK
button.
10
Step 9 Select Easy setup. Press OK button.
Select Access point, press OK button.
11
Step 10Enter WEP-key by Operation Panel, press
OK.
12
Step 11 Insert the Setup CD-ROM in to the
computer's CD-ROM drive.
13
Step 12 Click Run Msetup4.exe on the AutoPlay
screen. If AutoPlay screen not shown, go to the
CD-ROM folder and right click Msetup4.exe then
choose open.
14
Step 13 Select your place of residence in the
pop-up window. Then click Next.
15
Step 14 Click Easy Install. At the next page
Click Install.
16
Step 15 Select Use the printer on network. Then
click Next.
17
Step 16 Wait for the installation. It will take
a while. When Printer Detection screen appears,
click next.
18
Step 17In the detected printers list, select
your Printer and click Next.
19
Step 18 Wait for printer Setup Completion window
appears, click Complete.
20
Step 19 The Printer Application Menu will
appear. Now the setup is completed.
Congratulations.
21
(No Transcript)