Biokem Renew Lubricant

1
Biokem Renew Lubricant
2

• Through PROPEL Oil Management the image above
  shows how the protecting properties of lubricant
  additives never need to reach levels that risk
  maximum machine protection. Through renewal, at
  intervals determined by remaining useful life (
  RUL) testing, complete lubricant protection of
  machinery is achieved.

3
(No Transcript)
4

• Renewal does have its limits and if the lubricant
  additive level depletes below the critical limit
  and is left untreated, the lubricant becomes
  destroyed by a change in its molecular structure
  and must be replaced with new oil. This is why
  oil condition monitoring and trending the results
  is so important.

5

• As additive levels gradually drop due to
  consumption, minor degradation may occur
  according to operating conditions.

6
(No Transcript)
7

• At this early stage, rather than allowing the
  lubricant to degrade to a point where it changes
  its molecular structure, the lubricant is renewed
  by filtration, dehydration and additive
  replacement, returning the oil to as good as new
  specification (or higher).

8

• The renewed lubricant then begins the next life
  cycle, and the same scenario can repeat
  continuously while the lubricant is maintained
  using the PROPEL Oil Management system.

9

• The end result is that oxidation is controlled at
  very low levels, water and particle contaminants
  never build up to troublesome levels, and renewed
  oil continues to provide the maximum possible
  equipment protection.

10

• There is no greater protection possible than new
  specification oil in your equipment at all times
  which provides maximum reliability for your
  productivity schedules.

11
(No Transcript)
12

• For more information on the steps involved see
  the PROPEL Oil Management process flow.

http//www.biokem.com.au/