Steel Sheet Piling | JD Fields

1
Steel sheet piling
2
What is Steel Sheet Piling?

• Pile pressed from steel with a vertical
  interlocking system
• Used to create continuous wall in most cases to
  retain soil or water
• Can be permanent or temporary structures
• Mostly used in deep excavations, and during
  construction of bulkheads, piers, locks,
  cofferdams, basements and foundations

3
Advantages of Sheet Piling

• Earth and water resistant
• Environmentally friendly made from recycled
  material and can be reused because it doesnt
  lose its shape
• Durable and long-lasting
• Easy to find, obtain and transport

4
Methods of Manufacturing

• Hot Rolled Sheet Piling
• Steel is rolled at high temperature - usually
  over 1700 - above steels recrystallization
  temperature
• Steel easily shaped and formed with this method
• Often less expensive then cold formed sheet
  piling
• Less control with size because steel slightly
  shrinks once cools

5
Continued

• Cold Formed Sheet Piling
• Steel sheet is worked at room temperature into
  usable products
• Stamped, rolled or pressed into shape
• Produces product capable of having variety of
  surface finishes
• Higher tolerance, concentricity and straightness
  opposed to hot rolled

6
Steel Sheet Piling Shapes

• Hat- Shape
• U- Shape
• Z- Shape

7
Hat-Shaped Steel Sheet Pile

• Uses large section of thin wall that is
  hat-shaped
• Most effectively used for retaining walls in
  narrow urban areas, areas with weak ground, and
  construction to protect deep water piers and
  banks
• Used in civil engineering and to prevent ground
  subsidence
• Efficiently driven in due to more rigid design

8
U-Shaped Steel Sheet Pile

• Shape looks like letter U made up of web with
  two flanges
• Remains popular choice - widely known and used
  around the world
• Sufficient for temporary uses and structures
• Available in wide variety of sizes

9
Z-Shaped Steel Sheet Pile

• Shape looks like letter Z stretched horizontally
  made up of a web connected to two flanges with
  parallel outer faces
• Interlocks are symmetrically located and formed
  on the piles exterior elements
• Increased strength-to-weight ratio
• Most popular sheet piling after introduction in
  U.S. in 40s

10
Contact us

• Address 55 Waugh Drive, Suite 1250 Houston,
  Texas ,United States,77007
• Mobile No 281-558-7199
• Email ID jayfields_at_jdfields.com
• Social Media https//plus.google.com/1043279
  46784240837896/about
  
• 
  https//www.facebook.com/JDFieldsSteelInc?rf11057
  252339472
• Website http//jdfields.com

11
Thank you