How To Set IP Camera Motion Detection Alarm?

1
How To Set IP Camera Motion Detection Alarm?
2
1. Login IP camera via Internet Explorer, the
default user name and password is admin, if you
dont know how to operate Sysvideo IP camera,
please read the product manual for more
information.
3
(No Transcript)
4
2. Click main menu Config to open IP camera
setting page.
5
(No Transcript)
6
3. Click left menu to open motion detection alarm
page Alarm Setting -gt Motion Detection. You need
to set some parameters
7
Detection Area you can use your mouse to draw a
rectangular area on video, or you can choose all
area. You can set 4 sub areas at
most)Sensitivity you choose number 1-5,
greater value means higher sensitivity.
8
(No Transcript)
9
Enable detect You must enable this
option.Detection time Set the period of time
for motion detection and enable, two periods
allowed.
10
Linkage Alarm Output you can choose to send
email or FTP upload snapshot images or save
recording file on local SD card. If you need to
FTP upload or send a email, you first need to set
IP camera network parameter. If you only need to
send alarm information to NVR or CMS (central
management software) , you dont need to set
these option. Please click Save after you
finish all setting.
11
(No Transcript)
12
4.If all setting are OK, the Alarm menu will
display a alert icon when somebody cross the
detection area or the image been changed.
13
(No Transcript)
14
5.You can click Alarm menu to search all alarm
event log.
15
(No Transcript)
16
For more information or need any help, please
visit our website 
www.goodipcamera.com
Email sales1_at_sysvideo.cn Skype sysvideo_sales1
17
Thank You