Pharmaceutical Moisture Absorber Desiccants

1
Pharmaceutical Desiccants

• For Better Packaging Solutions

www.pharmadesiccants.com
2
Why Use Desiccants?
You know the two biggest enemies of any Packaged
Products?
Moisture Oxygen
Lethal potential to damage metals, drugs, woods,
plastics, glass, Foods, Cloth, Paper, Leather
The effects of Moisture Oxygen are Simply
Devastating!
On the product life, presentability,
functionality performance, on profits finally
on the repute of manufacturer/exporter
3
Strategy For Moisture Control....

• In Packaged Goods

Reduce! (by MAP Vacuum)
Eliminate (by Desiccants)
Prevent (by Barrier Packaging)
4
Something About Moisture

• Present in the air in the form of Vapors (Gas
  Phase) having more penetrative damaging ability
  than liquid form. We measure moisture in RH
  w.r.t.
• Temperature and is dynamic through out the year.
  Also the moisture in compressed air flow is
  measured as dew point.
• Affects integrity of packaging materials,
  packaged products, bacterial growth, bad odour
  etc

5
Problems! Problems! Problems!

• - Odour
• - Rust, Corrosion
• - Container Rain
• - Mold, Mildew and Bacterial Growth
• - Weak Cartons, Label Damages

6
Now The Solutions For Moisture

• Cargo Dry Paks

• Oxygen Absorbers

• Silica Gel Desiccants

7
How are Desiccants Rated?

• Packaging experts face a confusing array of
  variables when selecting moisture adsorbents
  partly because moisture control is a multifaceted
  challenge. There are four sources of water
  contamination in a closed container or package
• Water vapor in the air inside the package.
• Water vapor adsorbed by the materials inside the
  package Water vapor on the walls of the package
• Permeation of water vapor into the package.

8
Quality Parameters-Desiccants

• Should have very high adsorption capacity
• Should have low residual moisture (LOD)
• The desiccant material should have neutral pH
  (6.5-7.5), inert non-toxic in nature
• Should be packed in non-dusting, non-tearable,
  non-lintable packing materials preferably
  spun-bonded olefins
• The packet material should not have wetting
  effect on surface upon saturation
• Should be confirming to International standards
  CFR/EU compliant, MIL-D specs, JDEC-033, FDA etc
  
• Should be active (RTU) when using.
• The packet material should be permeable to
  moisture
• Desiccant must have moisture holding capacity at
  higher temperatures below evaporation point of
  water Desiccant should not release water upon
  saturation

9
Do Don'ts-Desiccants

• Do's

• Dont's

• Always use desiccants when you are ready to pack
  your goods seal immediately
• Place the desiccants at different locations
  inside the package near the possible sources of
  air permeation
• Store in the original container away from
  darkness
• Look at the HIC placed inside the desiccant
  container before using

• Expose the desiccants unnecessarily
• Remove the HIC card from the original container
• Use over-exposed desiccant pouches
• Punch holes in the desiccant packets

10

• Our Location
• 307, III Floor, Prayosha Complex, Next
  to Hyundai Motor Showroom, Chhani Jakat Naka,
• Vadodara - 390024
• Gujarat, India.

www.pharmadesiccants.com