You must complete Work Instruction 5 – Isolating & Removing VDOPS Inlet Hose

1
You must complete Work Instruction 5 Isolating
Removing VDOPS Inlet Hosebefore this Step
2

• Open sampling port on top of filter stack to
  remove any vacuum pressure in the system. There
  shouldnt be any oil expelled.

3
(No Transcript)
4

• Gently crack each of the eye bolts on the filter
  stack then undo them. Use a rag to clean around
  the seal lines and stop drips. .

5
(No Transcript)
6

• Unclip filter and slowly draw oit of filter well
  taking care that the oil drains back into the
  well. Inspect the filter for debris.

7
(No Transcript)
8
(No Transcript)
9

• Hang the filter bag on a hook over a bucket to
  drip dry before discarding.

10
(No Transcript)
11

• Fold new filter longwise and lower into filter
  stack. Then clip the filter rim into the top of
  the receptacle.

12

• Place lid back on the filter stack, centre it and
  evenly tighten the eye nuts and tighten firmy but
  do not overtighten.

13
(No Transcript)
14

• For more information, visit us

http//www.biokem.com.au/