Pearl® Waterless Car Wash Exterior Treatment

1
Pearl Waterless Car Wash Exterior Treatment
2
Welcome to Pearl Waterless International where we
would like to share with you the user, vehicle
and environment friendly process of exterior car
cleaning and polishing, using our waterless range
of products. Whether you are familiar or new to
Waterless Car Wash systems our products are ideal
for commercial use and own car maintenance.
Through many years of experience in dealing with
enquiries and auto cleaning operations worldwide,
we wish to provide you with our successful
process in order to deliver the perfect showroom
finish every time.
3
(No Transcript)
4
In line with all car care and valeting services
the first stage should always be a thorough
inspection of the vehicle and where possible out
of direct sunlight. Make sure the vehicle is free
from thick caked on mud or sand around skirts,
wheels and arches. If required, gently rinse
heavy muddy localized areas with minimal water
usage. Begin with Pearl Universal Cleaner and
moderately mist spray all wheel rims and tyre
walls. Making your way around the vehicle inspect
the exterior paintwork for any ingrained dirt,
tar, tree sap, insect remains and bird droppings.
Mist spray those areas also with Universal
Cleaner and leave for a short time to allow
product to break affecting substance down.
Universal is tough on these substances but gentle
on surfaces and the environment.
5
(No Transcript)
6
Then starting with the roof, lightly spray half a
section with Pearl Advanced Ultra Nano or Pearl
Professional ensuring adequate coverage. Run off
and product drops indicate too much usage and dry
areas indicate too little. Average usage 160ml
per saloon car. Fold 2 Microfibre Cloths (MF) in
half and half again to give you many clean
surfaces to work with and then spray one MF with
either Advanced Ultra Nano or Professional to
moisten, including the localised areas
pre-sprayed with Universal, such as grille and
wind mirror castings prone for ingrained insect
splatter. Then with little to no pressure
carefully glide the moistened MF over the
pre-treated panel in straight lines, lifting
product and dirt from the paintwork. Using your
second folded, dry and clean MF quickly buff the
area to remove any residue and create instant
mirror gloss shine. Ensure your buffing MF
remains completely dry. Carry out this process
until you have covered all the exterior surfaces
from top to bottom working around the vehicle as
you go. Adopting the same process as before,
simply spray wipe and buff the area with separate
MFs. It is important to understand the effects
of Wax contact with the Windscreen (Pearl
Advanced Ultra Nano contains premium Waxes). On
glass use pre-sprayed cloth to remove dirt or if
too soiled lightly spray a fresh MF and wipe over
glass ensuring to buff with clean dry cloth,
removing all residue to leave highly polished
surface.
7
(No Transcript)
8
Using the MF that has been used to clean the
vehicles surfaces, it is time to revisit the
pre-sprayed wheels. Firstly wipe over rims and
tyre walls to remove Universal residue, brake
dust and dirt, then apply Eco Tyre Shine using a
sweeping motion to coat the tyre wall, simply
wipe and overspray and leave to air dry. We
understand the importance of correct methods and
techniques to maximise performance of products to
deliver the very best results. Our outlined
procedure is a helpful guide however we fully
understand and appreciate that many detailers and
users have or will create their own system or
process. What is most important is to enjoy using
our products and results by creating maximum
shine in minimum time whilst saving precious
resources.
9
Visit
PearlWaterlessInternational.com