how to fix error 10049 in windows 10

1
Fix 10049 issuein
2
Introduction-

• Installation for Windows 10 build 10041 and 10049
  is easy, but difficulty may occur during the
  installation. The latest windows 10 use to take
  insanely very long time for the process of
  installation, much longer in comparison to
  previous build windows. Its even been seen to
  run for hours, or whole night or even days still
  the installation is not complete.
• Sometimes even the updating process appears to be
  hanged or stopped around 23 progress with
  setting up at 78, 30 with Applying PC setting
  at 0, or 70 with Applying PC setting at 88.

3

• The upgrading is sometimes blocked due to
  insufficient disk space. Windows Update signifies
  that updates are available in the name of
  fbl-impressive 10049 Professional or
  fbl_impressive 10041 Professional, but still
  errors are displayed as follows
• Updates are available but we temporarily need
  0.00 MB of space to install. Remove something
  that you dont need right now and well try again
  late.
• And at this point of time user simply opens the
  Storage Sense to learn whats occupying the space
  actually.

4
Possibility-

• If you upgrade the Windows 10 Build 10049 via
  Windows Update, the case will turn worse. Because
  Microsoft only provides Windows 10 Build ISO
  Images through official site, so essentially you
  cant perform clean install to fix the issues.
• As per Microsoft, downloading for all setup
  languages is caused by a Bug during the process
  of installation of windows 10 build 10041
  10049 space on the disk filled up quickly beyond
  the capacity, especially on the devices with
  limited disk space for example those virtual
  machines and tablets. The above discussed Bug is
  cause behind such issues and as a result it
  creates few of folders that are unexpected
  appearing on the Desktop or File Explorer.

5
Solution-

• Solution is to remove the unnecessary
  accidental downloaded language packs. But this
  solution cant be applied everywhere such as
  place where its showing low disk space as error.
• Or, youve successfully installed the update and
  you want to reclaim the disk space from the
  unused language packs after successful
  installation of latest build of Windows 10.

6
How to Fix ?

• Note If you cant install build 10049, this will
  not help. Scroll down to the Actual Fix below
  for the resolution.
• Open a Command Prompt as an Administrator.
• Bring up the user interface for uninstalling
  language packs by typing the following command
  and press Enter
• lpksetup/u
• Select the language that you want to uninstall,
  then follow the instructions.

7
Another issue that may occur-

• If your Windows 10 doesnt have any other
  language packs installed, yet the installation of
  build 10041 and 10049 doesnt complete, even if
  you wait for hours. Then it means that the
  problem isnt fixed yet, hence try the
  alternative method as shown below
• If the installation is taking too much time, then
  just power off and shutdown the PC. When Windows
  10 boots up again, it will automatically rollback
  to build 10041, discarding the failed new build
  installation itll give an error which causes
  no harm.

8
Solution-

• Issue thats actually causing the installation to
  be so long may be that the language packs are
  being downloaded during the upgrade process. For
  this, there is another effective solution, as
  shown below
• In Windows Update of Windows 10, initiate the
  upgrade to latest build of Windows 10 (i.e.
  fbl_impressive 10049 Professional). As soon as
  the update is downloaded, i.e. when Windows
  Update is starting that, its preparing to
  install updates, disconnect the computer from
  Internet.

9
Precautions-

• PC must be disconnected from Internet while doing
  the installation.
• This can be done by plugging out the network
  cable, switch off the Wi-Fi (must not forget the
  Wi-Fi network or to power off the router and
  access point, else Windows may connect to it
  while updating).
• Disable the network adapter in Network
  Neighborhood of Control-Panel, for Windows 10
  in virtual machine disconnect the network adapter
  from host.

10
Final step-

• Let the Windows 10 continue to upgrade, and it
  will take pretty short time to complete the
  installation of latest build.
• You can re-connect the computer to Internet once
  the update is done and Windows 10 re-boots up to
  desktop.

11

• For further more information please visit
• http//www.pcerror-fix.com/how-to-fix-windows-10-b
  uild- 10049-slow-installation-issue
• Thank You