Power Supplies for Military-Grade Systems (1) - PowerPoint PPT Presentation

About This Presentation
Title:

Power Supplies for Military-Grade Systems (1)

Description:

The ability to maximize power like this allows the systems to run much more efficiently and creates a more stable system. – PowerPoint PPT presentation

Number of Views:27
Slides: 13
Provided by: Abbott_Tech
Category: Other

less

Transcript and Presenter's Notes

Title: Power Supplies for Military-Grade Systems (1)


1
Abbott Technologies Presents
Power Supplies for Military-Grade Systems
2
Power Supplies for Military-Grade Systems
1. POL Converters
2. Paralleled Modules
3. Standardized Power Supplies
4. Faster Production Speeds
5. Subsystem Power Supply
6. Electromagnetic Compatibility
7. Electrical Isolation
8. Hermeticity
3
POL Converters
  • POL or Point of Load converters maximize power.
  • The POL converters allow a system to use much
    less power and use power at a much more efficient
    level.
  • These converters also allow the systems to use
    more power than they were previously
    able to use.

4
Paralleled Modules
  • Another way to maximize power efficiency is to
    use a system that runs on a parallel
    module.
  • These paralleled modules can generally work
    best with a high-powered system.
  • They can generally handle up to a 50 A current.

5
Standardized Power Supplies
  • Standardized power supplies have been lowering
    the costs of these military-grade power
    systems.
  • Since the power supplies are all required to
    contain and maintain consistency, they tend
    to cost less.
  • The company spends less on engineering and
    production costs, and the customer can
    receive the product.

6
Faster Production Speeds
  • Since companies are spending less time on the
    engineering and designing phases, they
    can ship the power supplies faster.
  • The sooner the military or the company receives
    the power supply.
  • The easiest way to do this is through a
    standardized power system.

7
Subsystem Power Supply
  • Military personnel use subsystem power supplies
    to ensure, their systems are getting a clear
    and steady supply of power.
  • They must meet military standards of 1275 and
    704 (MIL-STD-1275 / MIL-STD-704).
  • These systems must also continue to provide
    power to the gear and equipment during
    surges.

8
Electromagnetic Compatibility
  • One of the regulations, MIL-STD-1275 also
    regulates electromagnetic compatibility.
  • These standards ensure the system can handle
    electromagnetic spikes in all modes of
    operation including starting, normal
    and generator modes.
  • They must be able to continue to generate energy
    and push energy throughout the system.

9
Electrical Isolation
  • To ensure that all systems run without
    interference, the power systems must have
    electrical isolation.
  • To ensure electrical isolation, the system must
    move the energy across isolation
    boundary.
  • Electrical isolation is used primarily in
    military-grade power systems.

10
Hermeticity
  • When it comes to aviation, hermeticity is one of
    the most important factors in a military
    power system.
  • They must be hermetically sealed, when a customer
    seeks out a military-grade system.
  • It cannot function properly if it is constantly
    affected by outside sources and conditions.

11
Contact Us
Abbott Technologies
8203 Vineland Ave. Sun Valley, CA 91352 Sales
(800) 367-8200 Tech. Support (818) 504-0644
Fax (818) 768-0395
For more information visit http//abbott-tech.co
m/
12
Thank You
Write a Comment
User Comments (0)
About PowerShow.com