Biokem renew lubricant (1) - PowerPoint PPT Presentation

About This Presentation
Title:

Biokem renew lubricant (1)

Description:

Through PROPEL Oil Management the image above shows how the protecting properties of lubricant additives never need to reach levels that risk maximum machine protection. – PowerPoint PPT presentation

Number of Views:13

less

Transcript and Presenter's Notes

Title: Biokem renew lubricant (1)


1
Biokem renew lubricant
2
  • Through PROPEL Oil Management the image above
    shows how the protecting properties of lubricant
    additives never need to reach levels that risk
    maximum machine protection. Through renewal, at
    intervals determined by remaining useful life (
    RUL) testing, complete lubricant protection of
    machinery is achieved.

3
  • Renewal does have its limits and if the lubricant
    additive level depletes below the critical limit
    and is left untreated, the lubricant becomes
    destroyed by a change in its molecular structure
    and must be replaced with new oil. This is why
    oil condition monitoring and trending the results
    is so important.

4
(No Transcript)
5
  • As additive levels gradually drop due to
    consumption, minor degradation may occur
    according to operating conditions. At this early
    stage, rather than allowing the lubricant to
    degrade to a point where it changes its molecular
    structure, the lubricant is renewed by
    filtration, dehydration and additive replacement,
    returning the oil to as good as new specification
    (or higher).

6
  • The renewed lubricant then begins the next life
    cycle, and the same scenario can repeat
    continuously while the lubricant is maintained
    using the PROPEL Oil Management system.

7
(No Transcript)
8
  • The end result is that oxidation is controlled at
    very low levels, water and particle contaminants
    never build up to troublesome levels, and renewed
    oil continues to provide the maximum possible
    equipment protection.

9
  • There is no greater protection possible than new
    specification oil in your equipment at all times
    which provides maximum reliability for your
    productivity schedules.

10
(No Transcript)
11
  • For more information on the steps involved see
    the PROPEL Oil Management process flow.

http//www.biokem.com.au/
Write a Comment
User Comments (0)
About PowerShow.com