Propel Oil Management of BioKem

1
Propel Oil Management of BioKem
2
Step 1 CONDITION MONITOR

• Lubricant is monitored to determine the current
  condition and combined with previous results to
  provide a lubricant condition trend.

3
(No Transcript)
4
Step 2 REPORT

• Report percentage remaining useful life ( RUL),
  remaining additive content, water contamination
  and ISO rated oil cleanliness to identify when
  lubricant renewal is required.

5
(No Transcript)
6
Step 3 FILTRATION

• Lubricants can be filtered to as low as 1 micron
  and ISO cleanliness to the most demanding
  specifications, including ISO 4406 13/11/09

7
(No Transcript)
8
Step 4 DEHYDRATION

• With lubricants, The most effective water
  removal technology is vacuum dehydration.

9

• Water removal is performed continuously using
  vacuum dehydration in the PROPEL process, and can
  achieve down to 20ppm moisture content.

10
(No Transcript)
11
Step 5 ADDITIVE REPLACEMENT

• Critical additives, that are present in new oil
  to protect the base oil, are replaced in the same
  concentration levels as found in new oil.

12

• This process effectively brings the lubricant
  back to as good as new specification or in some
  cases, higher.

13
(No Transcript)
14
Step 6 CERTIFICATON

• To certify and report that the renewed lubricant
  meets or exceeds new oil specification.

15

• For more details information, visit us

http//www.biokem.com.au/