How to Make an Wooden Bastard Sword

1
How to make a Wooden Bastard Sword
2
Step 1

• Draw a bastard sword on paper. More likely draw
  the outline of the bastard sword which you want
  to make.
• Use stencil for straight lines and use a length
  of butcher paper or buy oversized sheets of
  crafts paper from craft store.

3
Step 2

• Cut and copy the stencil
• Cut the sword stencil out of the paper and then
  put it on the wood which you plan to use.
• Now mark the sword onto the wood and then copy
  the hilt of the stencil twice more.
• The hilt will thicker then the blade, so cut
  three pieces of the hilt and glue them together.

4
Step 3

• Cut your wood- Use jigsaw and cut three pieces of
  wood which you have outlined- two of hilt and one
  of complete sword.
• The cut show be little wider rather than a little
  narrow wide can be sanded down, but narrow cant
  be fixed easily.

5
Step 4

• Glue the pieces- In this step take a strong epoxy
  wood and make a strong mixture of glue.
• Spread it evenly on one side of each hilt and
  glue them firmly to the center piece.

6
Step 5

• Sand your sword- Start from the hilt and take a
  fine girt sandpaper to make the edges smooth.
• Once the hilt is even, use your sandpaper to
  bevel each side of the blade.

7
Step 6

• Check your hilt and make final adjustment
• Check to be sure your sword hilt isnt too thick
  to hold easily. If it is make use sandpaper to
  make it more fine.
• Sand down uneven parts until you will get the
  fine sword.

8
Step 7

• Begin with the painting of the sword.
• Use duck tapes or leather to cover the handgrip
  portion of the sword.
• You can also make a scabbard with hard paper and
  paint it with appropriate color.

9
Thanks For Watching