Chainmail Armor

1
How to make a Chainmail Armor
2
Step 1

• Getting all the tools and material which is
  required for making chainmail armor.
• Tools Needed Speed Drill, two needle nose pliers
  and mint bolt cutters.
• Material Needed Stainless Steel wire and 3.8
  wooden or metal dowel.

3
Step 2

• Making The rings
• Drill the hole at the end of 3.8 dowel.
• Place the dowel in the drill and thread the wire
  around the hole.
• Now start your drill and spin it slowly. The
  wire will grab around the dowel and looks like a
  spring. Continue this process till the end and
  keep the coil as tight as possible.
• After completing now slide the coil off the dowel
  and using the mini bolt cutters, cut along the
  length of the spring.
• Now individual rings has been made.

4
Step 3

• Weaving the Rings
• Now in this one is attached to 4 other rings.
• Around half of the rings you need to be close,
  you can do this using two pliers.
• Also need to bend some of the coil cut rings open
  in order to connect other rings.
• Now the opened ring with your needle nose pliers
  and hook four rings onto it.
• Take the opened ring and hook it down and up
  through the two rings on the top of the 4 in 1.
• Place the bottom two rings of the top 4 in 1 over
  the opened ring.
• Carefully pick up the opened ring and close it as
  in step 1.
• After joining two 4 in 1's together this is what
  it will look like.
• Continue this pattern to make strips of whatever
  size and length you want.

5
Step 4

• Now You are Ready for Battle
• Just need to get some axe and sword to complete
  your chainmail armor.

6
Thanks For Watching