DVDFab DVD Copy review--Your DVD Backup Expert

1

• DVDFab DVD Copy review--Your DVD Backup
  Expert
• If you are a DVD enthusiast, there are a
  lot of reasons for you to choose an ideal of DVD
  copy software, which is vital for your
  investment, your legitimate DVD well keeping and
  enjoying your favorite DVDs again and again.
• Legitimate DVD discs are usually
  expensive, and some blockbusters are even hard to
  get. If you have ever experienced a DVD damaging
  like occasional scratching, you must won't to
  experience it again since it is so hurt. A good
  DVD copy software lets you back up your
  legitimate DVD collection with stunning quality
  output, thus, the source DVDs are kept well,
  while you can enjoy your favorite DVDs with the
  same effect presented whenever you want.
• DVDFab DVD Copy is a famous DVD copy
  software widely used, which is capable of
  strategizing your DVDs flexibly. Work with DVDFab
  DVD Copy, you are provided with many choices to
  manage the output DVD to set them to be whatever
  you like.
•  
• As a professional DVD copy software,
  DVDFab DVD Copy is firstly a practical DVD
  decrypter, which can strip the protected DVD
  discs off any protections them may come up with.
  When you load in a source DVD, just several
  seconds, DVDFab can finish the source reading and
  loading, and then you enter into the main
  interface. Which means when the source is
  imported in DVDFab, the protections have already
  been removed and the DVD Content is accessible,
  you can make next operation. At the same time,
  the region code restriction in the DVD disc has
  also been removed and changed to the universal
  one which can be played anywhere you are on any
  device produced anywhere.

2

• DVDFab is a versatile DVD copying tool,
  which provides users six copy modes for choices
  Full Disc, Main Movie, Customize, Clone/Burn,
  Split and Merge. Speak to the output content, you
  can copy the entire disc or main movie only. If
  you just need a part of movie, well, you can do
  that with Customize mode. If you have higher
  request on the output quality or you need a total
  lossless DVD the same as the source, Clone is
  just right for you. It will clone the the source
  with 11 ratio strictly. That is to say, you
  won't loss any video and audio quality by means
  of copying under Clone. If you have a DVD-9, and
  you just got two DVD-5 discs, you want to copy
  the entire content and don't need any
  compression, then you can split the source DVD-9
  into two DVD-5 discs. If you want to integrate
  several parts of movies comes from several
  sources, Merge is the right one to help you.

3

• Apart from the copy modes, other customize
  settings are also offered to let you define your
  output DVD. When the source is added in DVDFab,
  the embedded audio subtitle stream along with
  the correct titles are recognized and listed on
  the operating interface. You can choose the ones
  you need to keep in the result by simply check
  them on.
• DVDFab is also equipped with the DVD compression
  function. Say you want to copy a dual-layer
  DVD-9, while you just have got DVD-5 blank discs
  at hands. Well, it's OK. You can compress the
  source DVD-9 to DVD-5, and the output quality is
  excellent as well. By the contrary, you can also
  copy DVD-5 to DVD-9. By choosing the output size
  you need, the corresponding compression ratio
  will be presented right behind it.

4

• If you are sure you have made settings for the
  output DVD, then it's time for you to get this
  DVD copying run. It's super easy, all you need is
  just make a click to trigger the Start button at
  the bottom right corner of the interface, and
  then the copying is beginning running. Detailed
  progress information will be presented, the
  elapsed time and left time can be get in the
  lower part of the processing interface.
• Usually, the final processing time will be
  totally determined by your PC hardware
  performance, the source size and your writable
  drive. However, thanks to DVDFab's batch
  processing, multi-core CPU, NVIDA and CUDA
  support, the copying speed will be speeded up to
  be several faster than its peers. The whole
  process doesn't require a long spell of analysis
  and encoding, just several minutes, it will be
  finished.

5

•  After finishing the whole process, let's have a
  view of the output DVD. Really amazing! Copy DVD
  with DVDFab, your complete DVD backup expert!
•  
• Author Bio Victor Han is just a simple boy who
  likes to write software reviews and some short
  stories. More info about DVDFab DVD copy, visit
  http//www.dvdfab.cn/dvd-copy.htm