Top 3 Ways to Get Off Plastic from Copper Wires

1
Top 3 Ways to Get Off Plastic from Copper Wires
The electricity plays an integral part in our
life. It is hard to imagine how the world would
have been without it. When you talk about the
electricity the first thing that comes to mind is
copper wires. These wires are used in almost
everything from big and small electric appliance
to electric wiring for home.
2

• BIG QUESTION MOST OF YOU WOULD ASK - HOW TO RIP
  OUT PLASTIC FROM COPPER WIRES?
• Well, here we are going to reveal some simple
  technique that will help you rip plastic off
  copper wires. Let us take a look at some of the
  easiest ways to do it.
• Using Pliers
• Melt the Plastic
• Using Knife
• Other Methods Of Barreling and Boxing up

3
1. Using Pliers
A pair of pliers comes up as the easiest way to
take out plastic. Grip the wires between the
pliers and simply pull it towards the right and
the plastic will come out with ease. Strictly
Avoid Some people also use blades but it is
risky as there is always a probability of
accidently cutting your fingers.
4
2. Melt the Plastic
The second popular method is to use heat to melt
the plastic. Boil water and then put the copper
wire in it. Let it remain there for 15 minutes.
Wear a pair of gloves and hold the wire tight
from one end and then using the other hand slide
it towards the right, the plastic will come off.
Strictly Avoid Some people burn the wire but it
reduces the quality of copper and of course
burning of plastic causes air pollution. The
smell of it will make breathing difficult.
5
3. Using Knife
You can rip off plastic from the wires using a
very sharp knife. Although, it is advised only if
you have less length of wire otherwise it will
just leave you exhausted as it is a time
consuming process. When using knife, be extra
careful, a small negligence may leave you
injured.
Strictly Avoid Refrain from using blunt knife.
6
4. Other Methods Of Barreling and Boxing up
There are other methods too like barreling and
boxing up the wire but it adds to non-copper
weight, so most people avoid it. We have revealed
the top three ways of ripping out plastic from
copper wires. You can go for the one that you
find convenient but make sure to take the
decision according to the length of the wire.
Once you have collected the bare copper wire then
you can sell it to any scrap dealer and make some
good profit. Before you go ahead with the deal
make sure to check the online price, visit at
least three online scrap dealers.
7
GANPATI ENGINEERING INDUSTRIES Contact Person
Mr. Gupta Address Gokul Path, Vaishali Nagar,
Jaipur - 302021 (Rajasthan) India Phone
91-141-2211977 (Office) TeleFax 91-141-2219147
(Office) Mobile [phone] (Mr.
Gupta) Email ganpati_at_ganpatiengineering.com
Web www.ganpatiengineering.com
8
Thanks Regards