Hospital Medical Furniture Manufacturers

1
Hospital Medical Furniture

• hospital furniture manufacturers in India.

2
Bed Side Screen (3 Panels)

• Code OML-1100
• Frame work made of ERW tubular pipe in three
  fold. The two outer fold 60 cm. Wide with one
  each castors of 50 middle span 122 cm. Wide with
  castors of 5 cm. Dia.Supplied with spring wire
  and curtains, Pre-treated and Epoxy coated.
• Size 168 hx244w cm
• Note Also available in 4-folds

3
Medical I.V. Stand

• Code OML-1101
• SS I.V rod with height adjustable. Plastic base
  with castors.

4
Medical Kick Bucket
Tubular Frame work mounted on 50 cms castors.
With 35 cms dia S.S. basi. Pre-treated and
Epoxy.Powder Coated.
5
Stainless Steel Dressing Trolley
Frame stainless steel square tube. 2 stainless
steel shelves with railing on top. Stainless
steel bowl dia 345mm. Bucket dia.300mm. Size 1080
L x 830 H mm. Also available in full stainless
steel/ powder coated frame with stainless steel
shelves and railings.
6
Traumacare Crash Cart Solied Linen Trolley S.S.
Tubular frame made of stainless steel mounted on
125mm Dia. Swiveling castors. Two castors with
brake and all castors provided with corner
buffers. Two stainless steel shelves with three
side railing provided. Hosed with tow polyestrene
storage units with three locakable drawers each.
Two top drawers provided with different sized
containers. Stainless steel IV rod provided.
Provided with Cardiac massage board. Supplied in
KDC. Size 940 x 490 x 1535 mm(LxBxH) approx
7
Mayo Instrument Trolley

• Tray size S.S. 56L x 40W cms. Rectangular CRC
  tubes mounted on 5cms castors, height adjustable
  byside Knob. Pre-treated with Epoxy Powder Coated
  finish. Also available in S.S. frame Tray.

8
Hand Wash Basin Stand
Five Legs base mounted on 5 cms dia castors. With
two approx.35 cms S.S basin. In SS pipe and
rings.Also available in pre-treated with epoxy
powder coated.
9
Hospital Ward Bed
Frame work of rectangular CRC tubes. Tubular Head
Foot Bows with vertical tube supports. 'H' type
legs mounted on PVC stumps perforated CRCA sheet
top. Provision for saline rod at four locations.
Pre-treated and Epoxy Powder Coated finish Over
all size - 206 Length x 90 Width x 60 H cms.
10
Hospital Semi Fowler Beds
Frame work of rectangular CRC tubes. S.S.Head
Foot Bows with laminated. 'H' type legs mounted
on 10cm castors two with brakes two sections
perforated CRCA sheet top. Back rest section
manouvered by srew machanism form the foot end.
Provision for saline rod at four locations.
Pre-treated and Epoxy Powder coated finish. Over
all size - 206L x 90W x 60H cms.
11
Hospital Fowler Bed
Frame work of rectangular CRC tubes. unequal Head
Foot Bows of CRC tubes, mounted on 10cms
castirs- two with brakes. Four Section preforated
CRCA sheet top. Back rest and knee rest section
manouvered by separate screw from foot end.
Provision for saline rod at four locations.
Pre-treated and Epoxy Powder coated finish. Over
all size - 206L x 90W x 60H cms
12
Hospital ICU Bed Mechanical
Frame work made of rectangular CRC tubes. 4
section top made of preforated CRCA sheet. Back
rest, knee rest, TB/RTB and Hi-lo postions
manonuvered by separate srew form foot end. ABS
molded head and foot bows. Also available with
collapsible / swing aways safety side railling,
telescopic IV rod. Bed mounted on 125 mm Dia
castor two with Brakes. Over all size - 206L x
90W x 60H cms.
13
Hospital ICU/CCU Bed Moniterised
Frame work made of rectangular CRC tubes, ABS
topin four sections, back rest, knee rest, TB/RTB
and Hi-lo postion obtained by electric actuators
operated by hand remote system, ABS moulded head
and foot bows. Also available with aluminium
collapsible safety side railing, Telescopic IV
Rod. Bed Mounted on 125 mm Dia Caster two with
locking. Over all size - 210 L x 90W x 80H
cms. Finish epoxy powder coated
14
Foot Step Double
Tubular legs fitted with PVC stump. M.S. top
fixed with rubber matting and aluminium beedings.
pre-treated nad Epoxy powder Coated. Size  18" x
9" x 9". Single step also available
15
Baby Cradle

• Tubular Frame. Stand with PVC stumps. Wire mesh
  hanging cradle pro-treated and epoxy coated
  finish.

16
Surgeon Chair
Cushioned seat and back. Pneumatic height
adjustable. 5 legs base on castors.
17
Contact Us Original Medical Equipment Company
Pvt. Ltd.579/C , Ground Floor,Laxmi NagarNew
Delhi -110092Phone  91 - 11 - 6587
4402Mobile 91 - 82850 78886Fax 91 - 11-
25641872E-Mail sales_at_original-medical.com, info_at_
original-medical.com, export.oml_at_gmail.comWebsite
 www.original-medical.com