Manufacturers Will Guide You Where To Use Brass Compression Fittings

1
Welcome To Vatsalya Metal
2
Manufacturers Will Guide You Where To Use Brass
Compression Fittings
Compressions fittings are ideal for plumbing
sector. A compression fitting is a kind of
coupling that is used to connect pipe or two
pipes to a valve or fixture. Brass compression
fittings manufacturers will explain their
products in this post and will also share best
ways to use these fittings. A compression
fitting is equipped with three parts- compression
nut, compression seat, and compression ring.
These fittings carry their own advantages and
disadvantages. Significant benefit of using
compression fitting is its ease of disassembly.
3

• When you take a tour of your home, you will find
  compression fittings in limited fixtures and
  appliances. Your bathroom vanities, under
  dishwasher, behind your toilets or refrigerator
  are the limited areas that use these fittings.
• These fittings are convenient in use and
  installation is painless. But at the same time,
  these fittings share negative side. If you don't
  use a compression fitting properly or have
  installed in wrong way, there are leakage
  chances. And when there is leakage risk involved,
  you may regret for sure.
• When you take a glance at compression fittings,
  you will find them ideally designed to inhibit
  the pipe movement outward from the fitting.

4
Some Tips Of Using Compression Fittings

• Lubrication is important
• It is always great to practices lubrication for
  your new compression fittings.
• Avoid overtightening of the fitting
• Overtightening of the fitting may cause severe
  damage to the fitting. It is true that you cannot
  expect a perfect, leakage resistant connection in
  your first try.
• Still you can try your hands and follow
  guidelines that manufacturers shared in the
  manual to install brass compression fittings.

5

• Never employ metal compression ring while using
  pipe tubing with compression fitting
• This will be a disaster of you use metal
  compression ring while using pipe tubing with
  compression fitting. Brass compression fittings
  manufacturers won't suggest you this thing.

6

• Compression fittings will not work on bent tubing
• As manufacturers intend 90 of compression rings
  that don't slide onto bent tubing. So, it is
  better not to use these fittings on bent tubing
  if you don't want get disappointed.
• Vatsalya is a pioneer manufacturer that supplies
  various brass products and fittings at decent
  rates. You can anytime mail your requirements for
  brass compression fittings, brass plumbing
  fittings, brass valves, brass components and
  spares to them and get the best deal from them.

7
Contact Us
8
(No Transcript)