Turbine Oil Varnish Australia

1
Turbine Oil Varnish Australia
2

• Biokem offer turbine oil varnish forming
  contaminant detection and removal, a solution to
  your turbine varnish that is recommended by
  Siemens.

3

• Oil varnish potential testing is completed by
  Membrane Patch Colorimetry (MPC) and can be
  completed on-site or off-site by oil sample
  supply. Test results determine the oils potential
  to deposit varnish.

4
(No Transcript)
5

• Varnish causing contaminant removal is completed
  using Electrophysical Separation ProcessTM (ESP)
  to absorb dissolved and suspended oil degradation
  products the cause of varnish.

6
(No Transcript)
7

• Eliminating varnish requires that you continually
  remove these deposits that are in both physical
  states (dissolved and suspended).

8

• This makes ESP technology a more effective
  varnish mitigation tool compared to competitive
  technologies, which results in lower varnish
  potential numbers in a shorter period of time.

9

• A matter of days will typically restore a heavily
  varnished turbine oil.

10

• Each varnish mitigation solution is individually
  tailored to best match the turbine model, fluid
  chemistry, operational mode, lubricant condition
  and type and rate of fluid degradation.

11
(No Transcript)
12

• ESP Systems are used successfully throughout the
  world to remove oil degradation products from
  turbine oil and to prevent trips and other
  problems associated with deposits.

13
(No Transcript)
14

• Contact Biokem today to organise your first MPC
  varnish potential test to begin solving your
  turbine varnish situation. challenge

15

• To know more information please visit

http//www.biokem.com.au/