Warehouse Floor Coatings - PowerPoint PPT Presentation

About This Presentation
Title:

Warehouse Floor Coatings

Description:

Here is New Presentation about EP Floors. EP Floors Corp. provide a facility of Warehouse Floor Coatings. – PowerPoint PPT presentation

Number of Views:57
Slides: 10
Provided by: Epfloors87

less

Transcript and Presenter's Notes

Title: Warehouse Floor Coatings


1
Warehouse Floor Coatings
2
Warehouse Floor Coatings
EP Floors Corp.  provides knowledge and expertise
in warehouse and loading dock floors, using the
latest high performance epoxy and
polyurethanes. Industrial flooring systems range
from thin mil epoxy coatings to 1/4?
towelled epoxy flooring,  urethane resurfacers,
and non slip systems. We have a system to fit
your needs! We provide Turn Key installation of
warehouse epoxy floor coatings with our own
crews, along with a solid, single-source
warranty.  Work may be done over weekends,
holidays. Fast
turnaround is guaranteed ! Perfect for
warehouses that are in the corporate
spotlight
3
Loading Dock and Warehouse Floors
DO IT RIGHT, DO IT ONCE! Warehouses and loading
docks are tough environments for flooring.  Bare
concrete has cracks and joints, which combined
with heavy traffic conditions, can cause concrete
spalls and breakage, potholes, low spots, etc.
 This can wreak havoc on the wheels and
suspensions on your material handling equipment
the repairs can run into the tens of thousands of
dollars
4
Consider the following 3 requirements
5
  • The nature of the materials stored in
    the warehouse
  • Corrosive liquids, solvents and specialty
    chemicals often demand a floor finish that can
    withstand potential spills, as well as the abuse
    dished out by the handling equipment typically
    used to maneuver containers that hold these kinds
    of materials (This type of area typically
    requires a towelled epoxy or urethane
    resurfacer).
  • The aesthetic expectations of the facility
  • A warehouse that is routinely part of corporate
    dog and pony shows must sparkle for every new
    visitor, and the floor finish must return to its
    initial luster upon regular cleaning. The coating
    must also be able to withstand the rigors of that
    frequent cleaning without chipping, undo wear,
    fading or discoloration.
  • Cleaning and Maintenance
  • The floor coating must retain its essential
    properties in the face of routine maintenance.
    Cleaning and scrubbing, power-sweeping, automated
    buffing, and similar procedures designed to keep
    the operation in top shape can damage the floor
    finish unless it is specifically formulated to
    endure such treatment.

6
There are two primary warehouse floor
coating systems that are recommended, and each
has its own strengths and weaknesses
7
  • Epoxy/Polyurethane hybrid system  Thin Mil
    Coatings
  • Epoxy primer coat seals the concrete, and
    provides maximum adhesion and build thickness to
    the system.  Polyurethane topcoat is applied for
    maximum cleanability, gloss retention,
    abrasion,chemical, and slip resistance.
  • 1/8 to 1/4 inch Urethane Resurfacer system (trowe
    lled or self leveling)
  • This system is highly durable for heavy traffic
    conditions, and provides a permanent solution  
    it has the added benefit of restoring a heavily
    damaged concrete floor, to a smooth condition,
    and providing a vapor barrier for the concrete,
    which is needed in certain circumstances.   An
    epoxy/urethane thin mil coating system is
    typically applied over this, for maximum
    cleanability, gloss retention, abrasion,chemical,
    and slip resistance.
  •  

8
EP Floors Corp
Corporate Headquarters
4 Springfield StreetFifth FloorThree Rivers, MA
01080
Phone  413-283-5164Toll Free  800-808-7773
Email info_at_EPFloors.comFax 413-283-5347
Visit Our Website http//www.epfloors.com
9
Thank You
Write a Comment
User Comments (0)
About PowerShow.com