NTC 249 Read, Lead, Succeed/Uophelpdotcom - PowerPoint PPT Presentation

About This Presentation
Title:

NTC 249 Read, Lead, Succeed/Uophelpdotcom

Description:

NTC 249 Week 1 DQs and Summary NTC 249 Week 2 DQs and Summary NTC 249 Week 2 Network Design for Acme Manufacturing Network Draft NTC 249 Week 2 OSI Model Paper NTC 249 Week 3 DQs and Summary NTC 249 Week 3 Short Answers NTC 249 Week 3 Network Design for Acme Manufacturing Equipment Draft NTC 249 Week 4 DQs and Summary NTC 249 Week 4 VLAN Paper NTC 249 Week 5 DQs and Summary – PowerPoint PPT presentation

Number of Views:9
Slides: 32
Provided by: cherry13

less

Transcript and Presenter's Notes

Title: NTC 249 Read, Lead, Succeed/Uophelpdotcom


1
NTC 249 Read, Lead, Succeed/Uophelpdotcom
  • For more course tutorials visit
  • www.uophelp.com

2
NTC 249 Entire Course
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • NTC 249 Week 1 DQs and Summary
  • NTC 249 Week 2 DQs and Summary
  • NTC 249 Week 2 Network Design for Acme
    Manufacturing Network Draft
  • NTC 249 Week 2 OSI Model Paper
  • NTC 249 Week 3 DQs and Summary
  • NTC 249 Week 3 Short Answers
  • NTC 249 Week 3 Network Design for Acme
    Manufacturing Equipment Draft
  • NTC 249 Week 4 DQs and Summary
  • NTC 249 Week 4 VLAN Paper
  • NTC 249 Week 5 DQs and Summary
  • NTC 249 Week 5 Network Design for Acme
    Manufacturing

3
NTC 249 Week 1 DQ 1
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 1 DQ 1
  •  
  • What are two WANs that you have used? What
    equipment or devices were used? Describe the
    network design and configuration? Respond to your
    classmates, and discuss how your examples differ.

4
NTC 249 Week 1 DQ 2
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 1 DQ 2
  •  
  • Chou (2009) discusses a very common situation in
    business, communications between branch offices,
    and the home office data center. The author
    presents two methodologies to improve throughput
    between the offices and the data center data
    compression and caching. Analyze and discuss the
    common types of data used in your company to test
    the suitability of these methods. Additionally,
    discuss where, in general, data compression can
    be used and where data compression cannot be used.

5
NTC 249 Week 1 DQ 3
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 1 DQ 3
  •  
  • Soares, et al. (2008) review all the present
    protocol segments necessary for VoIP telephony.
    Protocol such as Session Initiation Protocol
    (SIP) and H.323 are prevalent but have
    limitations. Analyze and discuss the limitations
    of SIP and H.323 as presently used and include in
    your discussion effects of the proposed Advanced
    Multimedia System (AMS) protocol and whether it
    will fix the existing problems.

6
NTC 249 Week 1 Summary
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write 300 Words Summary of this week

7
NTC 249 Week 2 DQ 1
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 2 DQ 1
  •  
  • What are the advantages and disadvantages of
    VoIP? What VoIP services exist? What equipment
    may be necessary in a small office/home office
    (SOHO) and large enterprise environment?

8
NTC 249 Week 2 DQ 2
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 2 DQ 2

9
NTC 249 Week 2 DQ 3
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 2 DQ 3
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • Based on the Khan and Tahboub (2009) article,
    analyze and discuss the advantages and
    disadvantage of the MPLS protocol and what
    services are most likely to use that protocol in
    the network.
  •  
  • If the link on the Materials page is not working
    the article can be found at http//medianet.kent.e
    du/techreports/TR-2009-02-01-dcnatmpls.pdf

10
NTC 249 Week 2 Network Design for Acme
Manufacturing Network Draft
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Draft a logical network drawing for Acme to
    depict the recommended WAN. Include the
    recommendations for the type of leased lines the
    company should choose at each location.Draft
    recommendations on the type of telecommunications
    systems that would work best for Acme private
    branch exchange (PBX) or VoIP.

11
NTC 249 Week 2 OSI Model Paper
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write a 3-4 page paper (400 words per page)
    describing the open systems interconnection (OSI)
    model and how it relates to a network. Your
    response should include answers to the
    following On which layers of the OSI model do
    WAN protocols operate? What are some of these
    protocols? On which OSI layers do switches and
    routers operate? If routers reside at more than
    one layer, what is the difference between the OSI
    layers?

12
NTC 249 Week 2 Summary
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write 300 Words Summary of this week

13
NTC 249 Week 3 DQ 1
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 3 DQ 1
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • Conduct an Internet search to locate an example
    of a private network and a public network. How is
    each network used? What are the pros and cons of
    each?

14
NTC 249 Week 3 DQ 2
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 3 DQ 2
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • Explain sub-netting in a way a nontechnical
    client would understand. Add clarification to
    other student explanations.

15
NTC 249 Week 3 DQ 3
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 3 DQ 3
  •  
  • Find a web site, an article on a web site or a
    peer reviewed article that is related to this
    weeks material. Write a 250-300 word synopsis
    what you have found and explain why you think it
    is relevant. Make sure you include the references
    and links to the article or web site.

16
NTC 249 Week 3 Network Design for Acme
Manufacturing Equipment Draft
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Draft recommendations on network equipment that
    should be placed at each location. Also consider
    equipment based on the teleconferencing
    needs.Draft a recommendation on how to secure
    the network. Make appropriate recommendations for
    wireless at Acme.

17
NTC 249 Week 3 Short Answers
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Provide answers to each of the following
    questionsIdentify the functions of a CSU/DSU.
    How are they used in a corporate environment?
    Integrated services digital networks (ISDN) are
    sometimes used in locations that do not support
    DSL or cable modem connections. Your choices may
    be analog modems or an ISDN connection in those
    remote locations. Describe three benefits ISDNs
    have over regular dial-up modem connections.
    Compare and contrast packet and circuit
    switching. Which is more commonly used? What are
    the advantages and disadvantages of each?
    Describe the three main types of firewalls.
    Explain how each type protects the network.
    Determine which firewall is the most efficient
    and why.Your answers should be 3-4 pages long in
    total (400 words per page).

18
NTC 249 Week 3 Summary
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write 300 Words Summary of this week
  •  

19
NTC 249 Week 4 DQ 1
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 4 DQ 1
  •  
  • Write a 250- to 300-word short-answer response to
    the following What are some of the greatest
    security risks to a WAN? Provide an example of
    one risk and discuss the potential consequences
    and possible precautions.
  •  

20
NTC 249 Week 4 DQ 2
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 4 DQ 2
  •  
  • Write a 250- to 300-word short-answer response to
    the following Network attacks come in many
    forms. Broadley, et al. (2009) point out a new
    method where the attacker creates a covert
    communication channel by changing the timing of
    part of a real signal and sneaking in. Analyze
    and discuss whether your system at work could be
    attacked by this methodology and if you think so
    what are you going to do about it?

21
NTC 249 Week 4 DQ 3
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 4 DQ 3
  •  
  • Find a web site, an article on a web site or a
    peer reviewed article that is related to this
    weeks material. Write a 250-300 word synopsis
    what you have found and explain why you think it
    is relevant. Make sure you include the references
    and links to the article or web site.

22
NTC 249 Week 4 Summary
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write 300 Words Summary of this week

23
NTC 249 Week 4 Team Assignment Network Design for
Acme Manufacturing
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • NTC 249 Week 4 Team Assignment Network Design for
    Acme Manufacturing

24
NTC 249 Week 4 VLAN Paper
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Consider the following scenarioYour Company
    moves into a new building. Marketing is on the
    first floor, engineering is on the second floor,
    operations are on the third floor, and the call
    center is on the fourth floor. The LAN is
    organized neatly, with each floor having its own
    switch. Some of the groups on the floor are
    connected through hubs and the network is planned
    for orderly growth. The company grows faster and
    much differently than was planned, however, and
    the call center must be expanded. Some of the
    engineering department employees on the second
    floor and operations employees on the fourth
    floor move offsite, and the call center expands.
    Space is compressed and users move to other parts
    of the building, but their communities of
    interest do not change. The same users still need
    to communicate with the same services.

25
NTC 249 Week 5 DQ 1
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 5 DQ 1
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • How can wireless interface with a WAN? Discuss
    security concerns with wireless and best
    practices to protect a wireless system?

26
NTC 249 Week 5 DQ 2
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 5 DQ 2
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • Worldwide Interoperability for Microwave Access
    (WiMAX) is a very popular topic today since it
    offers the possibility of wireless broadband
    signal capability over large geographic areas.
    WLAN signals suffer from a number of potential
    degradations such as multipath and fading.
    Balakrishnan, et al. (2009) analyzes the WiMAX
    technology in these conditions. An interesting
    side note to recognize is that this analysis was
    done via computer simulation using software
    called OPNET. Analyze and discuss the potential
    for the use of WiMAX in your corporate
    environment. Do you see WiMAX becoming the
    predominant WAN wireless technology of the
    future? If so, why? If not, why?

27
NTC 249 Week 5 DQ 3
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Week 5 DQ 3
  •  
  • Write a 250- to 300-word short-answer response to
    the following
  •  
  • Li, et al. (2009) have provided a brief review of
    early network structures and are also providing
    their view of the future generations of wireless
    networking out to the 7th generation. Analyze and
    discuss you personal view of either agreement or
    disagreement with the authors. In either case
    present support or alternatives

28
NTC 249 Week 5 Summary
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • Write 300 Words Summary of this week

29
NTC 249 Week 5 Team Assignment Network Design for
Acme Manufacturing Paper
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • NTC 249 Week 5 Team Assignment Network Design for
    Acme Manufacturing Paper

30
NTC 249 Week 5 Team Assignment Network Design for
Acme Manufacturing Presentation
  • For more course tutorials visit
  • www.uophelp.com
  •  
  • As a Learning Team, finalize the network design
    for Acme Manufacturing.
  • The final presentation should be 10-12 pages (400
    words per page) plus any diagrams or charts
    needed to explain the design.
  • Submit to instructor

31
NTC 249 Read, Lead, Succeed/Uophelpdotcom
  • For more course tutorials visit
  • www.uophelp.com
Write a Comment
User Comments (0)
About PowerShow.com