Examcollection 200-120 VCE

1
Cisco- 200-120-CCNA Cisco Certified Network
Associate CCNA Pass Cisco 200-120 exam with 100
Guarantee 100 REAL EXAM QUESTIONS ANSWERS Get
All PDF with Complete Questions Answers File
from http//www.examcollectionvce.com/vce-200-120
.html 100 Exam Passing Guarantee Money Back
Assurance
2
Sample Questions
QUESTION 1 Refer to exhibit
Which destination addresses will be used by Host
A to send data to Host C? (Choose two.)

1. the IP address of Switch 1
2. the MAC address of Switch 1
3. the IP address of Host C
4. the MAC address of Host C
5. the IP address of the router's E0 interface
6. the MAC address of the router's E0 interface

Answer C, F
3
Question 2 The network administrator must
establish a route by which London workstations
can forward traffic to the Manchester
workstations. What is the simplest way to
accomplish this?

• Configure a dynamic routing protocol on London to
  advertise all routes to Manchester.
• Configure a dynamic routing protocol on London to
  advertise summarized routes to Manchester.
• Configure a dynamic routing protocol on
  Manchester to advertise a default route to the
  London router.
• Configure a static default route on London with a
  next hop of 10.1.1.1.
• Configure a static route on London to direct all
  traffic destined for 172.16.0.0/22 to 10.1.1.2.
• Configure Manchester to advertise a static
  default route to London.
• Answer E

4
Question 3 Refer to the exhibit. What is the
most appropriate summarization for these routes?
A. 10.0.0.0 /21 B. 10.0.0.0 /22 C. 10.0.0.0
/23 D. 10.0.0.0 /24
Answer B
Question 4 Router1 was just successfully
rebooted. Identify the current OSPF router ID for
Router1.
A. 208.149.23.194 B. 220.173.149.10 C.
208.149.23.162 D. 190.172.32.10 Answer A
5
Question 5 What is the meaning of the term
dynamic as displayed in the output of the show
frame-relay map command shown?

• The Serial0/0 interface is passing traffic.
• The DLCI100 was dynamically allocated by the
  router.
• The Serial0/0 interface acquired the IP address
  of 172.16.3.1 from a DHCP server.
• The DLCl100 will be dynamically changed as
  required to adapt to changes in the Frame Relay
  cloud.
• The mapping between DLCI 100 and the end station
  IP address 172.16.3.1 was learned through
  inverse ARP.
• Answer E

• Question 6
• What will happen if a private IP address is
  assigned to a public interface connected to an
  ISP?
• Addresses in a private range will be not routed
  on the Internet backbone.
• Only the ISP router will have the capability to
  access the public network.
• The NAT process will be used to translate this
  address in a valid IP address.
• Several automated methods will be necessary on
  the private network.
• A conflict of IP addresses happens, because other
  public routers can use the same range.
• Answer A

6

• Question 7
• Which Cisco Catalyst feature automatically
  disables the port in an operational PortFast
  upon receipt of a BPDU?
• BackboneFast
• UplinkFast
• Root Guard
• BPDU Guard
• BPDU Filter

Answer D
Question 8 A router has two Fast Ethernet
interfaces and needs to connect to four VLANs in
the local network. How can you accomplish this
task, using the fewest physical interfaces and
without decreasing network performance?

1. Add two more FastEthernet interfaces.
2. Add a second router to handle the vlan traffic.
3. Use a hub to connect the four vlans with a
   FastEthernet interface on router.
4. Implement a router-on-a-stick configuration.

Answer D
7
Question 9 What statement is true of the
configuration for this network?

• Based on the information shown above, Which of
  the following correctly describe the
  configuration for this network?
• The configuration that is shown provides
  inadequate outside address space for translation
  of the number of inside addresses that are
  supported.
• Because of the addressing on interface
  FastEthemet0/1, the Serial0/0 interface address
  will not support the NAT configuration as shown.
• The number 1 referred to in the ip nat inside
  source command references access-list number1.
• External Router must be configured with static
  routers to networks 172.16.2.0/24.

Answer C
8

• Question 10
• The network administrator is asked to configure
  113 point-to-point links. Which IP addressing
  scheme best defines the address range and subnet
  mask that meet the requirement and waste the
  fewest subnet and host addresses?
• A. 10.10.0.0/18 subnetted with mask
  255.255.255.252 B. 10.10.0.0/25 subnetted with
  mask 255.255.255.252 C. 10.10.0.0/24 subnetted
  with mask 255.255.255.252 D. 10.10.0.0/23
  subnetted with mask 255.255.255.252 E.
  10.10.0.0/16 subnetted with mask 255.255.255.252
• Answer D
• Buy Complete Questions Answers File from
• 100 Exam Passing Guarantee Money Back
  Assurance
• PDF Version Test Engine Software Version
• 60 Days Free Updates Service
• Valid for All Countries

http//www.examcollectionvce.com/vce-200-120.html